Date: Thu, 06 Sep 2001 14:00:01
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: CT70 dead screen - attention Matt

>Date: Thu, 6 Sep 2001 09:13:27 -0400
>From: "Pres Waterman" <[EMAIL PROTECTED]>
>Subject: Re: CT70 dead screen - attention Matt
>
> >
> > Seriously, I tested it by bending a paper clip and using that to short 
>out
> > the suspect fuse - lo and behold, the screen lit up! If the fuse is ok,
>the
> > paper clip will make no difference, but of course you don't want to 
>short
> > the fuse to anything else :)
>
>
>But whatever blew the fuse will now be UNPROTECTED by that paperclip...
>resulting in anywhere from good news, to really bad news. This is unsafe
>advice.
>
>Thanks
>
>Pres Waterman W2PW

Pres,

Perhaps I wasn't clear that the *testing* that the PCB fuse was blown was 
performed using the paper clip. Safe, because (a) low voltage - 5V (though 
current could be highish) and (b) whatever blew the fuse was no longer 
attached to the circuit[1]. But not to be performed by someone not 
reasonably aware of the potential problems.

The fuse has been *repaired* by soldering correct rated fuse wire to the 
outside of fuse, pending the unlikely acquisition of the correct replacement 
component. The paper clip is retired to a position of high honour, where it 
will collect a small pension from the Empire.

I should stress that I do not recommend *anyone* without the necessary 
skills, knowledge, and physical agility should perform any modifications to 
the Lib circuit boards. However, Matt was already aware of these 
limitations.

Cheers,

Neil

[1] The machine in question had been dropped, which had totalled the screen, 
though the lamps and inverter still worked (so I'm told, I haven't seen it). 
The fuse probably died at the same time, either through some temporary short 
in the screen or from the impact.

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to