Date: Mon, 1 Oct 2001 14:18:25 +0200 From: "Robbert J. van Herksen" <[EMAIL PROTECTED]> Subject: RE: Snippin' was (Re: H RE: UNSUBSCRIBE from Libretto Digest?)
Hi there, Take out the HD, put it on the table with the pcb facing up, and the connector facing you. You'll see two notches left & rite of the bottom row. Pin no 1 is bottom row on the rite side. ________________________________ | 18 16 14 12 10 08 06 04 02 | | 17 15 13 11 09 07 05 03 01 | _N____________________________N_ N= notch Cheers Robbert > Regards - Keith > > p.s. Which end of the Libretto's (CT50) HDD is pin one? - I have > an 2.5" to 3.5" > convertor but can't see the pin nos on the printed circuit. (This mail is "snip-code-of-conduct" approved) ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
