Date: Sat, 20 Oct 2001 09:59:37 +0800
From: Raymond <[EMAIL PROTECTED]>
Subject: Re: [LIB] Battery problem


>What I think the problem might be:
>My libby does not always "boot" when I turn on the power.  I have to remove
>the battery, reinsert, and turn on again, and then I see the bios screen,
>etc.. and it boots.

Sounds like something more serious is wrong with your libby ... made sure everything 
that could possibly come loose has been well seated? (dunno about anyone else but that 
monitor/accupoint cable to motherboard connector looks REALLY flimsy). It could well 
be that the act of removing and re-inserting the battery pack is enough to move 
whatever is loose back into line. Next time it happens perhaps try flexing the libby 
instead of pulling and reinserting the battery pack and see if that works (don't 
worry, laptop circuit boards, and circuit boards in general, tend to take more 
punshment than is generally thought, just don't apply CONTINUOUS pressure like having 
a too-big hard drive under the RAM slots!).


>Last time this happened, I pulled the battery WHILE the power cord was still
>attached to the unit.

Thats generally not a bad thing I would have thought ... how else would you swap 
battery packs without shutting down?


>Could this have zapped the battery, or blown a fuse on that battery?  My other
>battery works fine in the unit.

Perhaps ... I think those batteries have 2 fuses in them (one is thermal and looks 
like a diode I think), might be worth opening it up and getting out the multimeter ...


- Raymond




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to