Date: Fri, 28 Sep 2001 13:00:00 -0700 From: "Jason Kim" <[EMAIL PROTECTED]> Subject: Re: Got it1!
Not only does case matter, I don't know about the 7.1 installer, but previous versions asked for the directory that *contains* the redhat directory, iirc. And when you specify a partition, wouldn't you need to provide the entire device and partition (like /dev/sda4)? Again, I'm not familiar with the 7.1 install, so I'm not of much help here, but I hope that this proves useful. -Jason ----- Original Message ----- From: "David VanHorn" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, September 28, 2001 10:08 AM Subject: Re: Got it1! > Date: Fri, 28 Sep 2001 12:03:14 -0500 > From: David VanHorn <[EMAIL PROTECTED]> > Subject: Re: Got it1! > > At 09:43 AM 9/28/01 -0700, Eiren K. Smith wrote: > >Date: Fri, 28 Sep 2001 12:29:53 -0400 > >From: "Eiren K. Smith" <[EMAIL PROTECTED]> > >Subject: Re: Got it1! > > > >Thanks, Jason. I've been trying that, but no joy. Is there a cylinder limit > >past which it will not look for the copied files? My D: partition (where > >I've copied the CD files) follows a ~4GB C: partition. Could that be it? > > > >Also, what directory do I need to point to in the "Select Parition" box? > >I've tried "RedHat/", "" (no path specified), "RedHat/base/", and > >"RedHat/RPMS/". I've also tried all these without the trailing slash. Still > >it says either ""Device /dev/hda5 does not appear to contain Red Hat CDROM > >images." and > > if I type a directory name wrong, I get "Failed to read directory > >/tmp/hdimage/<whateverthewrongnameis>: No such file or directory". > > > >Can you or anyone else lend some advice? > > Case matters. RedHat is not the same as redhat > -- > Dave's Engineering Page: http://www.dvanhorn.org > > Got a need to read Bar codes? http://www.barcodechip.com > Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, with > two or five digit supplemental codes, in an 8 pin chip, with NO external parts. > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
