Date: Mon, 26 Nov 2001 23:45:48 -0500
From: "Lawrence Young" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Lib 50 won't recognize a new 4.3G hard drive
Did you overclock your L50?
----- Original Message -----
From: "James S. Clarke" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Monday, November 26, 2001 8:42 PM
Subject: [LIB] Lib 50 won't recognize a new 4.3G hard drive
> Date: Mon, 26 Nov 2001 20:37:23 -0500
> From: "James S. Clarke" <[EMAIL PROTECTED]>
> Subject: Lib 50 won't recognize a new 4.3G hard drive
>
> I am trying to install a 4.3G hard drive (Toshiba MK4313MAT) in my
> Libretto 50 and cannot get the machine to recognize it.
> When I use the Win95 Setup Boot Disk (and press F12), it starts to set up
> Windows, but then says "Setup cannot install Win95 on your computer. Your
> computer does not have a hard disk..." Exiting gets me to an A> prompt,
> but I cannot get to a C> prompt or attempt to format the C drive ("Invalid
> drive specification").
> I can get to the System Setup (BIOS Version 6.60) by pressing F1 after
> booting without the FDD, but it shows "No Drive" under Hard Disk and will
> not permit a change.
> Any help will be greatly appreciated.
> Jim
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> -------TO UNSUBSCRIBE-------
> Reply to any of the list messages. The reply mail should be
> addressed to: [EMAIL PROTECTED] - Then replace any text
> on the message's subject line: cmd:unsubscribe
> --------TO UNSUBSCRIBE DIGEST------
> Do above but with this on subject line: cmd:unsubscribe digest
> **************************************************************
>
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
