Date: Mon, 10 Dec 2001 05:31:02 -0800 From: carval <[EMAIL PROTECTED]> Subject: Solaris on Lib
Hi I too, installed Solari 8 on a Vaio 505 by pop out the HD, and installing the OS in a similar Sony with CD-ROM. I tried it on the Libretto110, it did NOT worked, I figured the two laptops where too different? I'm take a Cisco CCNA Class (s), I would like to learn how do it using a network?? Can I use a Dos boot disk with network support to access a remote CD-ROM to load Solaris? or do I have to make a Solaris boot disk with network support? I thought that at layer 1 (physical) using tcp/ip you can access system(s) across different platforms?? I know it can be done, when I purchased the Xig driver (video) they had a table on laptops where the driver was tested, and the Libretto110 was listed. TIA -------------------- 5 -------------------- Date: Sun, 9 Dec 2001 07:44:06 EST From: [EMAIL PROTECTED] Subject: Solaris on Lib I've gotten 2.6 and Solaris 7 running on both a Libretto 20 and Libretto 110. 2.6 was easier, pop the disk out, put it in a similar desktop and loaded 2.6 from CD. The Lib 20 took a standard VGA driver, and I bought a compatible 3com PCMCIA card... ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
