Date: Sun, 13 Jan 2002 18:24:43 -0600 From: [EMAIL PROTECTED] Subject: Re: [LIB] CT 110 Floppy
There is a windows driver on the toshiba web site. It is either under the 100CT listing or the 110CT listing. On 13 Jan 2002, at 16:12, Douglas Asmussen wrote: > Date: Sun, 13 Jan 2002 16:07:27 -0800 > From: Douglas Asmussen <[EMAIL PROTECTED]> > Subject: CT 110 Floppy > > Hi All, have just formatted and installed windows 98 SE on my 110, I have been >having a heck of a time getting the floppy to work, basically it doesn't except from >a Win98 startup disk. Am I wrong in assuming that it is a windows driver issue, due >to the fact that it works fine from the start up disk. I have tried a couple of win98 floppy disk drivers off the web with no luck, one actually worked but reported the floppy as a drive d:\, which I did not like. I have searched thru the archives with no answers that seem to work being found. Hopefully someone on the group has gone thru this and would be willing to help. Sure I can use the floppy from a DOS start up but would rather have access from windows. TIA > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
