Date: Mon, 14 Jan 2002 17:48:40 -0500 From: "Pres Waterman" <[EMAIL PROTECTED]> Subject: Re: [LIB] fdcmon.vxd
> The situation is the floppy will only work booting from a Dos prompt, as > soon as windows starts the floppy refuses to operate. Have used a Toshiba > Utilities disk for a CT50 and it does include the file fcdmon.vxd, did > install from the windows setup, still no floppy. I am missing something very > simple I am sure but as to what...........Have reset the Bios to both > cardbus-16 bit and to Auto-select with no luck. > > > > Note that the correct install method, if I recall, is to go > > control...add/remove programs...windows setup...have disk... and then > > navigate to the install file that way OK. Here's what to do. Boot to DOS. Copy the accessories stuff to the HDD. Install from the HDD. Also check the IRQ and resources of the floppy when it is installed. I believe IRQ15 is right. Thanks Pres Waterman W2PW c/o Patchogue Motors, Inc. Long Island Ford and Kia dealer GO BILLS! ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
