Date: Thu, 31 Jan 2002 22:44:53 -0500
From: "David Hettel" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Nonbooting Libretto =(

One thing you could try is removing all power then the extended memory
module. Then restore the power, see if this will bet it to boot, if it
starts working you can put the memory back in.

HTH
David

----- Original Message -----
From: "Cerulean Skies" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Thursday, January 31, 2002 9:12 PM
Subject: [LIB] Nonbooting Libretto =(


| Date: Fri, 01 Feb 2002 02:06:45 +0000
| From: "Cerulean Skies" <[EMAIL PROTECTED]>
| Subject: Nonbooting Libretto =(
|
| Hi everyone,
|
| I've got a comatose Lib100 all of a sudden, and the lack of symptoms
leaves
| me not knowing where to start looking for a problem.  When I press the
power
| button, I would hear the machine turn on, the drive crank for a few
seconds,
| and that's it.  Blank screen, no output on an external monitor either.  No
| response to the reset button or the power button.  Doesn't matter if it's
on
| battery or mains.  Last I used it was a week ago, it worked perfectly, and
| it had not been abused between then and now.  I don't have any PC cards in
| the slots.  The last problem I had with it was over two months ago, when
the
| CMOS battery was drained.  Connecting it to the mains for a few days cured
| that, and it's been working since then.  Anyone got any suggestions on
where
| to look?
|
| Thanks,
| Shultz
|
| _________________________________________________________________
| Send and receive Hotmail on your mobile device: http://mobile.msn.com
|
|
|
|
| **************************************************************
| http://libretto.basiclink.com - Libretto mailing list
| http://libretto.basiclink.com/archive - Archives
| http://www.picante.com/~gtaylor/portable/faq.html - FAQ
|                  -------TO UNSUBSCRIBE-------
| Reply to any of the list messages. The reply mail should be
| addressed to: [EMAIL PROTECTED] - Then replace any text
| on the message's subject line: cmd:unsubscribe
|               --------TO UNSUBSCRIBE DIGEST------
| Do above but with this on subject line: cmd:unsubscribe digest
| **************************************************************
|





**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to