Date: Sun, 10 Feb 2002 20:30:21 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Experiences trying to get Linux onto this @!#@#$@#$@#$# thing!
At 02:44 AM 10/02/2002 -0800, you wrote: >Date: Sun, 10 Feb 2002 10:41:09 >From: "neil barnes" <[EMAIL PROTECTED]> >Subject: Re: [LIB] Experiences trying to get Linux onto this @!#@#$@#$@#$# thing! > > ><snip ray's experiences> > >One question Ray: > >How much space are you using for MS partitions? If it's less than 8G in total, you're >probably better off *without* ezdrive, just keep everything in the first 8G. > >Perhaps you could post your partition table? Here it is, this is from memory so the figures might not add up exactly ... /dev/hda1 2 gig FAT16 for Win95 /dev/hda2 2 gig EXT2 for Linux /dev/hda3 100 meg Linux Swap /dev/hda4 extended partition for rest of disk /dev/hda5 1.8 gig FAT16 for WinNT (I'll convert to NTFS later) /dev/hda6 1.8 gig FAT16 for backup images (accessible in the event EZ-Bios dies) <blank space for hibernation> /dev/hda7 6.6 gig FAT32 general data area for Win95 /dev/hda8 2 gig FAT16 common data partition for both NT and 95 /dev/hda9 2 gig FAT16 common data partition for both NT and 95 Of course, now my next problem is I can't for the life of me get this blasted PCMCIA card services thing working under Linux!!! Anyone got any ideas or any pointers? (yes I know of pcmcia-cs.sourceforge.net, I was wondering if someone knew where the ready made RPM's were as I'm not too crash-hot compiling this sorta stuff myself). - Raymond --- /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ | | "Does fuzzy logic tickle?" | | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +-------------------------------------------| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net | | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/ ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
