Date: Thu, 14 Feb 2002 11:58:25 -0800 (PST) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] FW: [libretto] 100CT bios & display
> > Can anyone tell me how access BIOS on start-up? Press ESC on power up until asked to press F1 to enter BIOS. > > Also, does anyone know which model monitor to select? Not the Standard Plug & Play monitor is fine. > > driver - I know that. Since I upgraded to Win98 second edition (from > > original Win98) I haven't been able to get the display to work > > properly. Never a good thing with most MS products. better to scrub and install win98se fresh. But, if you need, boot to Safe Mode, device manager -> delete all display drivers and monitors, then reboot and install the Toshiba display drivers. ===== adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
