Date: Sat, 09 Mar 2002 23:00:18 +0000 From: T i m <[EMAIL PROTECTED]> Subject: Re: [LIB] Ok, so who's a flasher?
Hi again Phillip, phillip ramirez wrote: > > Think youll just have to find a driver for it.. And shouldn�t be a > problem.. [T] I have looked but nothing as yet .. > Whats it doing? What brand is it?? > Have you tried booting with the card in?? Have you checked to see what > the conflict is? [T] Woa .. one at a time! Ok the 4 cards I have are .... 1 x Fujitsu 128K (wow!) SRAM and it comes up in Device Mangler under .. Memory Technology Drivers (MTD's) + SRAM Memory Card 1 x Mitsubishi-II 'Melcard' (256k) MF3257-L2DAT01 and that comes up as above 2 x AMD, C Series, Flash Memory Card, AmC002CFLKA (Berg Electronics) This appears under .. ? Other Devices + Memory Card Device (MTD-A401) I get the card insersion and removal beeps with all 4 cards. I think I remember needing some Card Manager software (or as least some tools from) or something the last time I tried to use these things? So .. mean anything to you? All the best .. T i m > > > -----Original Message----- > From: T i m [mailto:[EMAIL PROTECTED]] > Sent: Saturday, March 09, 2002 3:51 PM > To: Libretto > Subject: Re: [LIB] Ok, so who's a flasher? > > Date: Sat, 09 Mar 2002 21:43:38 +0000 > From: T i m <[EMAIL PROTECTED]> > Subject: Re: [LIB] Ok, so who's a flasher? > > Hi again Phillip, > > I have just ordered a PCMCIA to SmartMedia adapter for 17.99 pounds (inc > Vat), plus 99 pence P&P! ;-) > > I must admit I was thinking of using my USB <> SmartMedia adapter but > that would be even more stuff to carry. I tried the serial transfer from > my Fuji DX10 to the Libby but it's very slow (especially with a full > 128M card!). > > Thanks for the tip Phillip > > All the best .. > > T i m > > p.s. I'd still like to get my 2M flash ram cards working .. just for the > fun of it! ;-) > > phillip ramirez wrote: > > > Date: Sat, 9 Mar 2002 14:45:51 -0600 > > From: "phillip ramirez" <[EMAIL PROTECTED]> > > Subject: RE: [LIB] Ok, so who's a flasher? > > > > A pcmcia adapter.. Nice thing is you can pull the media from the cam > > and slide them into the libby and swap pics.. > > > > -----Original Message----- > > From: T i m [mailto:[EMAIL PROTECTED]] > > Sent: Saturday, March 09, 2002 2:52 PM > > To: Libretto > > Subject: Re: [LIB] Ok, so who's a flasher? > > > > Date: Sat, 09 Mar 2002 20:44:54 +0000 > > From: T i m <[EMAIL PROTECTED]> > > Subject: Re: [LIB] Ok, so who's a flasher? > > > > Hi Phillip, > > > > I have a few SmartMedia cards .. how would I interface them though > > without USB etc? > > > > T i m > > > > phillip ramirez wrote: > > > > > Date: Sat, 9 Mar 2002 14:37:07 -0600 > > > From: "phillip ramirez" <[EMAIL PROTECTED]> > > > Subject: RE: [LIB] Ok, so who's a flasher? > > > > > > Go out and buy yourself some cf cards and use that as simple > > > storge... > > > > > > -----Original Message----- > > > From: T i m [mailto:[EMAIL PROTECTED]] > > > Sent: Saturday, March 09, 2002 2:31 PM > > > To: Libretto > > > Subject: [LIB] Ok, so who's a flasher? > > > > > > Date: Sat, 09 Mar 2002 20:23:40 +0000 > > > From: T i m <[EMAIL PROTECTED]> > > > Subject: Ok, so who's a flasher? > > > > > > Hi Friends, > > > > > > Today I was having a sort out of some of my Libby PCMCIA bits and > > > found some Flash memory cards. When inserted they are all detected > > > but > > > > > only one seems happy without a driver. Even thoughit's happy (in > > > Device > > > Mangler) I've forgotten how to use it? > > > > > > Do I need anything else to make it happy .. do I have to format it > > > etc? > > > > > > The only two cards worth considering are AMD C Series 2M 5V cards? > > > > > > So, what's next please? > > > > > > All the best .. > > > > > > T i m > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://libretto.basiclink.com/archive - Archives > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed > > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > > subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > > > _________________________________________________________ > > > Do You Yahoo!? > > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://libretto.basiclink.com/archive - Archives > > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed > > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > > subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be addressed > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be addressed > > to: [EMAIL PROTECTED] - Then replace any text on the message's > > subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be addressed > to: [EMAIL PROTECTED] - Then replace any text on the message's > subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
