Date: Sat, 23 Mar 2002 02:59:54 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] L50 w/damaged sound chip or fuse on MB?
>From: Raymond <[EMAIL PROTECTED]> > >Well when I take out ANY hard drive from my L100 after its been running for >about an hour (NOT OVERCLOCKED!) the hard drive comes out WAY too hot to >hold onto (to the extent that when I was installing it and had to keep >putting it in and out of the libby, I had a piece of paper just the right >size to hold onto the thing!).< YIKES!! >Even my overclocked L50, just after thermal shutdown, never got that hot >... perhaps the L50/70's were more heat sensitive (hence the lower thermal >shutdown threshold).< So it sounds like things are being engineered to work under higher heat conditions at the same time as engineering things to go faster and creating higher heat. Sound like the latter is running out in the lead of the former for these little guys. I guess it can go the other way. Weren't the Athlon CPUs around the 800MHz point were generating higher heat than some of the newer faster Athlon CPUs? Matt _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
