Date: Wed, 10 Apr 2002 12:30 +0000 From: <[EMAIL PROTECTED]> Subject: Re: [LIB] Touchscreen Kits
Dear Mr. Kroll, I found at http://home.datacomm.ch/psumesgutner/libretto/en/mod_1100_c.htm: Some technical data of the Toshiba Libretto FF1100: [...] Screen TFT Pixel size 0.19 x 0.19 mm Screen size 7.1" Visible area 153.6 x 93 mm I do not have the exact maximum outside dimensions of the touchsensor that can fit within a Libretto, because Librettos do not have touchscreens. For the same reason, I can not tell you where the sensor tail is located on the touchscreen, its length, width and contact configuration including the pinout specs. Is it possible to send you a Libretto ff1100 aka 1100, that you can examine, what you can do? If YES, then we should come to an agreement about the conditions of: A. Receiving a Libretto 1100, examining it and sending it back, if an implementation of a touchscreen kit is impossible. B1. Receiving a Libretto 1100, examining it B2. proposing, what can be done, if an implementation is possible, even with some changes, .... waiting for confirmation by owner B3. installing the touchscreen kit and sending the Libretto back to sender. I post your emails in the Libretto Mailing List and will ask people in the Libretto community, what else can be done. I will ask Toshiba for further specifications. I assume, that people with other Librettos like 50, 70, 100, 110, 1010, 1050 are interested. I am excited to hear from you. Kind regards Bernhard Bernhard H. Schmitz Organisation Counsellor Buchenstr. 3 65933 Frankfurt/Main Germany ------Originalnachricht----- Von: "sales" <[EMAIL PROTECTED]> An: <[EMAIL PROTECTED]> Betreff: Re: 7.1'' Touchscreen Kits Datum: Dienstag, 9. April 2002 23:11 Dear Mr. Schmitz, We have manufactured touchscreens for several PDAs. A touchscreen cannot simply be cut-down, however, we can manufacture to any size. To do this we need to know the exact maximum outside dimensions of the touchsensor that can fit within the Libretto. You may get this dimension from the previous touchscreen. We also require where the sensor tail is located on the touchscreen, its length, width and contact configuration including the pinout specs. Please also specify the exact dimensions of the viewable display. Thanks, Steve Steve Kroll ezscreen div. of intech bearing inc. 1999 tellepsen st. houston, tx usa 77023 ph: 713.926.1186 toll-free ph.: 888-TouchEZ (888.868.2439) fax: 713.926.3110 www.ezscreen.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
