Date: Mon, 29 Apr 2002 00:17:27 -0400 From: "Gennadiy Tsygan" <[EMAIL PROTECTED]> Subject: Overclocking
I am thinking about oveclockin L110 by increasing a front side bus speed. I found a datasheet for a timer chip. http://www.cypress.com/cfuploads/img/products/38-07211.pdf Output frequency is adjustable by applying logical 1 or 0 on three selector pins. I don't know much about mobile processors, but I thought they are fairly similar to the desktop ones. So I expected to find bas speed of 66MHz. When I looked on the board of the L110 I found that pull-up resistors are set for FSB speed of 40MHz. Any ideas what it means? I made pictures of the board and can post them if anyone is interested. By the way, can I attach pictures on this list? ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Sunday, April 28, 2002 10:06 PM Subject: [LIB] Taking the battery apart > Date: Sun, 28 Apr 2002 21:06:28 -0500 > From: [EMAIL PROTECTED] > Subject: Taking the battery apart > > Does anyone have a good method for cracking the battery case? I > got mine half opened then I cracked the cover. I tried prying it open > with a knife blade. It's not working very well. Its very tightly glued. Is > there an easier way? TIA > > John > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
