Date: Thu, 2 May 2002 08:11:50 -0500 From: [EMAIL PROTECTED] Subject: Lib 100 266 overclock woes - resolved
So, having those 2 L100s, I figured out after hearing from you guys that it is not that bad, to overclock to 266. The actual bridging of the pads was not bad, but then the thing would not boot up. Power on, no video. So I figured, it mut not like the 266. So I tried 233, 200. Same no video. So I went back to 166. No video. Trembling in fear a few months back, I put it together back and it was fine. But the gnawing question remained: how comes that most can I cannot overclock to 266 ? So I tried it again over the weekend. Same exacu scenario, same results. But then, after a few more tests, I realized what happened: the damn thing NEEDS to have an HDD ! I was not putting back the HDD during the testing phase. So, with the HDD in, works great at 266. Thank you all for the good directions on how to do the modification. Runs great on my 98 L100, now it will be time to try on the L100 running win2k. Konrad ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
