Date: Fri, 10 May 2002 12:02:52 -0400
From: =?ISO-8859-1?Q?=B7TechnoDragon=B7?= <[EMAIL PROTECTED]>
Subject: RE: [LIB] [lib] 70 into 50 almost goes...

>===== Original Message From "Lines, Nick" <[EMAIL PROTECTED]> =====
>When I plug the 50's screen into the 70, text mode is fine but when 640x480
>vga kicks in then there's ghosting on the screen and the colours aren't all
>displaying properly.  It's as if it's running in 12 bit mode or something...
>
>I'm using the 70s motherboard and keyboard in a 50 case with a 50 screen and
>all the leads from the 50 screen.

     I would think it's the 50's screen cable / leads. I would use the 70's 
cable. What happenned was you might have kinked the cable. Those are very thin 
and fragile mylar cables that not just might, but /will/ crack easily if 
they're bent the wrong way when you have it open to service it. I used about 8 
bent paperclips to keep my cable in it's exact form when I took it out of the 
libretto to replace my screen. That way I insured it wouldn't get cracked.
     My 70ct, right after I got it a few years ago, literally had the screen 
go south as I was walking away from the seller after paying cash. I paid him, 
as I turned away with a smile on my face saying "This is so cool, I finally 
have a Libretto now! =D" Then 15 minutes later, the screen went solid while. 
Upon disassembly of the screen, I could see one of the chips on the back of 
the display had a neat little burnt crater in it's middle, an obvious sign it 
wasn't the seller who sold me a bum libretto, but just a random screen burn 
out thing.
     I then found on this list a 50's screen that I promptly put into the 
libretto. It worked just fine with absolutely no problems. So, it's what you 
have Nick, a 50 screen on a 70's mboard. For you I would recommend checking 
the screen's contacts on teh connector, using a multimeter to check the 
cable's contunity to see if there are any broken traces, and try your 70's 
cable in it, if it fits.

That's all I can recommend.

|       _____ _____ _____ __ __ __ __ _____ _______________
|  THE /_  _// ___// ___// // // |/ // _  //______________/
|       / / / _/_ / /__ / _  //    // // /_______________ 
|      /_/ /____//____//_//_//_/\_//____//______________/
|   _______________ ___   ___   ___   _____ _____ __ __
|  /______________// _ \ / _ \ /   \ / ___// _  // |/ /
| _______________ / // // //_// /\ // /_ // // //    /
|/______________//____//_/\_\/_//_//____//____//_/\_/




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to