Date: Wed, 15 May 2002 23:35:45 +0900 From: brett <[EMAIL PROTECTED]> Subject: Re: [LIB] Libretto L1 and windows XP
Henri, The software Gennadiy Tsygan refers to is available on my support site: http://downloads.conics.net/ and also Toshiba Japan: http://www5.toshiba.co.jp/pcss/member/download/winxp/libretto/l1.htm And I've run the Power Saver etc on Libretto L1 and L2 (win ME / 2000 / XP) it works 100% in all these English OS by the way. specifically this folder http://downloads.conics.net/libretto/ please read the order of installation and (Toshiba EULA - Japanese ! haha). with this software you can conrtol the bright ness etc on the Libretto L1,2,3 -Brett Install in this order when you set up a Libretto L1/L2 with English ME / 2K / XP video driver audio driver modem driver Toshiba Common Module Toshiba Power Saver Toshiba Utilities henri wrote: > Date: Wed, 15 May 2002 18:05:02 +1000 > From: "henri" <[EMAIL PROTECTED]> > Subject: Re: [LIB] Libretto L1 and windows XP > > Thank you for answering. > > What is the name of this (or these) utility ? > > ACPI is not supported under Windows XP anyway... > > What is the shortcut keyboard command to increase / decrease the brightness > ? > > Thank's again > > Best regards > Henri > > ----- Original Message ----- > From: "Gennadiy Tsygan" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Wednesday, May 15, 2002 10:06 AM > Subject: Re: [LIB] Libretto L1 and windows XP > > > Date: Tue, 14 May 2002 20:01:51 -0400 > > From: "Gennadiy Tsygan" <[EMAIL PROTECTED]> > > Subject: Re: [LIB] Libretto L1 and windows XP > > > > From the experience with older Librettos I think that there is a software > > utility which controls brightness. The problem is that L1 is a Japan only > > model, and English version of the utility may not exist. Try downloading > > similar utilities for other Toshibas. One of them might work. Usually two > > programs are needed: ACPI common modules and Toshiba Power Saver. > > > > ----- Original Message ----- > > From: "henri" <[EMAIL PROTECTED]> > > To: "Libretto" <[EMAIL PROTECTED]> > > Sent: Tuesday, May 14, 2002 1:15 PM > > Subject: [LIB] Libretto L1 and windows XP > > > > > > > Date: Wed, 15 May 2002 03:10:34 +1000 > > > From: "henri" <[EMAIL PROTECTED]> > > > Subject: Libretto L1 and windows XP > > > > > > Just curious.. To know if someone has the same problems... > > > > > > On a Libretto L1 upgraded with: > > > - 256 Mb RAM > > > - American keyboard > > > - Network PCMIA card 10/100 Mb / second. > > > > > > - installed Windows XP without any problem. > > > - Installed Windows XP (all upgrades) without any problem > > > > > > - Installed Windows Office XP without any problem > > > - Installed Windows Office XP service pack without any problem. > > > > > > Now I do have a problem when running on battery: > > > After about 15 seconds the screen is deemed by about 50% and I do not > > know > > > how to > > > increase the brightness.. > > > > > > If anyone could tell me how.. I would be delighted. > > > > > > Thank you in advance. > > > Best regards. > > > Henri > > > > > > > > > > > > > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://www.silverace.com/libretto/ - Archives > > > > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > on the message's subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > > > > > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://www.silverace.com/libretto/ - Archives > > > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
