Date: Thu, 16 May 2002 19:32:13 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Re: Libretto 110, 8gb barrier
At 04:10 AM 16/05/2002 -0700, you wrote: >Date: Thu, 16 May 2002 07:08:13 -0400 >From: "car val" <[EMAIL PROTECTED]> >Subject: Re: [LIB] Re: Libretto 110, 8gb barrier > >Hi Raymond, > >My understanding about the overlays programs, they work like the >old disk compression programs (DriveSpace, I forget the others?) Drive overlays are NOTHING like DriveSpace. When your computer boots, it loads basic IO routines from BIOS into RAM. Some operating systems such as DOS and Win9x (and hence any diagnostics tools you run under these operating systems) then makes calls to these routines in RAM for any basic IO operations (such as disk operations). Unfortunately, the BIOS disk control routines that comes with the libretto will only see 1024 cylinders. Drive overlays such as EZ-Bios and OnTrack DiskManager replace the drive control routines in memory with versions that will see past 1024 cylinders (hence the term 'overlay', they overlay the old drive access routines with new copies). It is able to do this by loading into the MBR and therefore loads before the OS. When you install these utilities, they take a copy of the existing MBR and once it loads its own code, it loads the old MBR and hence your OS boots. The drive overlay program itself is stored at the start of the disk (and possibly in the MBR itself). As such, it does add to the size of the 'bookkeeping' information stored at the beginning of the drive and hence will displace the partition information by a certain amount. Therefore, the overlay also loads code that will compensate for this so that any diagnostics or partition management utilities that look at the drive will know about this and take it into account. The use of drive overlays is well respected. If you've purchased any general retail aftermarket hard drive (not OEM drives) they'll have come with a drive overlay package. Western Digital actually preinstall an overlay on their retail drives. Many major diagnostics utilities such as Partition Magic, Norton Ghost and DriveImage, plus all major operating systems including all versions of Windows, Linux and BSD, will have support (and in most cases, explicit support) for major drive overlay programs such as EZ-Bios and OnTrack DiskManager. Operating systems like WinNT/2k and Linux don't need a drive overlay when running normally as these operating systems bypass certain BIOS routines such as those that access the disk. Instead of overlaying the old routines, they don't even make calls into those areas of RAM and instead access the disk directly. >Were you have a 1gb HD, it would create one large database file and >trick the HD into seeing 1.75gb. If, the file got corrupted you would lose >everything. Nope. Nothing like that. If you were to take a disk with EZ-Bios and put it into a computer that CAN see past 1024 cylinders by itself (but not actually LOAD EZ-Bios), the computer would still be able to see the entire hard drive (however you shouldn't manipulate the partitions as the presence of the drive overlay displaces the partition info which can cause problems with some programs unless the overlay is loaded). If you only manipulate the partition table with the overlay loaded you'll be fine. >So, will the hibernation install it self automaticly at the end of what >the HD see?? Hibernation is a BIOS routine that is not overwritten by drive overlays for the simple reason that its Toshiba specific. As such, the hibernation routines in BIOS (and loaded into RAM such that they respond to a panic shutdown interrupt) will only see 1024 cylinders. There is no easy way around this as a perusal of the list archives will demonstrate. We've been through these topics before. - Raymond --- /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ | | "Does fuzzy logic tickle?" | | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +-------------------------------------------| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/ ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
