Date: Fri, 07 Jun 2002 21:28:54 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] pa2450
At 06:15 AM 7/06/2002 -0700, you wrote: >Date: Fri, 7 Jun 2002 06:39:01 -0700 >From: scott wormser <[EMAIL PROTECTED]> >Subject: pa2450 > >will this work for a l110? > Toshiba Satellite/ Protege AC Adapter (PA2450)- >-Works with MANY models of Toshiba notebooks Well almost every Toshiba laptop (certainly all the ones I know of) from about 1995 until the end of 2000 that ran on DC power used 15VDC adapters so as far as voltage goes you're reasonably safe. I'm not aware of any that used less than 15V and 24V Toshiba laptops only started coming out around the start of 2001. However, AFAIK, the Satellite range of Toshiba laptops use a 2.5mm DC plug (a 'standard sized' version of the L50/70 DC plug), as do the older Portege range. The newer Porteges (3110(?) and above) use the same square plug that the L100/110 use. You can have a look on the Toshiba website for the accessories page but I get the feeling you'll find that adapter to be a 15 volt power supply but with a 2.5mm DC plug on it (the 3.5mm plug version for the L50/70 has a part number PA2500). You could still use it to power the L110 but you'll need to put a new plug on it (you could just cut down a normal 2 pin header and use that). Of course, you could probably pick up a suitable switchmode 'wall brick' from your local electronics hobbiest store for $20USD or so ... Hope this helps! - Raymond --- /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ | | "Does fuzzy logic tickle?" | | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +-------------------------------------------| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/ ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
