Date: Sat, 03 Aug 2002 18:02:17 -0500 From: John Musielewicz <[EMAIL PROTECTED]> Subject: Re: [LIB] IDE to PC Card adapter
On Sat, 3 Aug 2002 10:05:08 -0700, you wrote: > That isn't good enough to tell. > > There's standard 12mm high 2.5" HD slots and drives, as well as 9.5mm HD >slots and drives. Most big laptops come with 12mm high slots, although lately, >many of the latest have been slimming down. > Hmmm..since they won't tell me I'll email their sales and tell them I won't order one until they tell me the height.<VBG> The thing about it is these PCMCIA to IDE adapters aren't too complex. They are just a board with a logic chip and two connectors. The thickness of the board and connectors should easily be under 9.5 mm. If it is too thick that means they made the housing too high. remove the board from the housing and it might fit in just fine if it was stuck in a 9.5 mm housing. John ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
