Date: Wed, 04 Sep 2002 22:39:23 -0600 (MDT)
From: "M. Warner Losh" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Speaking of hardware ...

In message: <[EMAIL PROTECTED]>
            Raymond <[EMAIL PROTECTED]> writes:
: Whilst we're on the topic of hardware mods, any hardware gurus here 
: interested in getting a Palm folding keyboard to talk to the Libretto? I've 
: got what you could probably call a "first alpha" version of a hardware 
: design and firmware combo for a circuit that uses a PIC16F84 
: microcontroller to do the footwork (it draws power for itself and the 
: folding keyboard from the Libby's PS2 port, either through the docking 
: station or through the motherboard hack mentioned on my webpage) ... it 
: *works* (as in all the standard keys work including shifting, arrow keys 
: and some Fn combos) but I've only got it working in the last 5 minutes or 
: so (after I realized that the code segment that I pulled off the web for 
: the serial comms had the timing delays WAAAYYYYY out), so testing is ... 
: umm ... minimal to say the least ... hehe
: 
: Who else is interested in building one then having a play around to see 
: what can be fixed/improved? The hardware construction itself is more fiddly 
: than hard (mine is still on breadboard!) but you would probably want to 
: have at least a little experience with writing for, and programming, the 
: PIC16x8x series microcontrollers if you also want to play with the firmware 
: bit (speaking of which, there were some really WEIRD quirks that caused me 
: a few hours of hairpulling ... who here is a PIC guru and who won't mind a 
: few Q's in private about what might have caused some of these problems?).
: 
: Once I'm more confident that it's working properly I might do a page up on 
: how to build one of these but until then, anyone who's interested in 
: testing out what I've got so far, get in touch!

Years ago I hacked the newton keyboard to work with the Libretto's
serial port.  The palm folding keyboards are also serial devices.
Maybe it would be easier to write a driver for whatever OS you desire
to use than to get the hardware solution working.  I know that it was
a lot easier to write an X driver for me on FreeBSD.

There are (or were years ago) several web sites that has a bunch of
different projects like this, including a 68HC05 (?) microcontroller
project for the newton keyboard.

My X driver is available at
        http://www.village.org/~imp/newtkb-1.0.tar.gz
in case you wanna play with it.

Warner



**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to