Date: Sun, 22 Sep 2002 11:54:17 -0600
From: John Musielewicz <[EMAIL PROTECTED]>
Subject: Re: [LIB] Battery pack rebuilt with LG Chem 2000 mAH cells
 
   Thanks alot. I've been looking for a decent battery monitoring
   program. Have you used it? How do you like it? Will it run in
   DOS too?


On 2002-09-22 [EMAIL PROTECTED] said:
   >Date: Sun, 22 Sep 2002 12:01:08 -0400
   >John, I would recommend using BatteryMon from
   >http://www.passmark.com/products/batmon.htm to evaluate life of your
   >battery.
   >----- Original Message -----
   >Sent: Saturday, August 31, 2002 9:38 PM
   >Date: Sat, 31 Aug 2002 08:32:33 -0500
   >Charging now so if it terminates properly it'll work. I'll know in a
   >few hours.
   >John
   >On Sat, 31 Aug 2002 17:40:36 -0700, you wrote:
   >>Date: Sat, 31 Aug 2002 07:34:33 -0500
   >>All this talk about batteries reminded me I hadn't tested the pack
   >>I rebuilt yet with LG Chem 2000 mAH cells. The cells were too big
   >>to fit with the cover on so I left it off and the pack slipped
   >>right into the computer. The computer booted ok with the pack and
   >>when I removed it the old pack worked just fine- charges and
   >>everything. The battery gauge showed the new pack at 1% charge
   >>which woulld be normal for rechargeables.
   >>I next took the pack outside and plugged it into the external
   >>charger and let it rip. The green light showed charging and the
   >>pack didn'[t explode from the charging current.
   >>I was only able to charge for about 10 minutes since my roommates
   >>were using the extension cord so wasn't able to do a full charge
   >>however I suspect it will work just fine. Once I do a complete
   >>charge I'll repost.
   >>John
   >>**************************************************************
   >>http://libretto.basiclink.com - Libretto mailing list
   >>http://www.silverace.com/libretto/ - Archives
   >>                 -------TO UNSUBSCRIBE-------
   >>Reply to any of the list messages. The reply mail should be
   >>on the message's subject line: cmd:unsubscribe
   >>              --------TO UNSUBSCRIBE DIGEST------
   >>Do above but with this on subject line: cmd:unsubscribe digest
   >>**************************************************************
   >**************************************************************
   >http://libretto.basiclink.com - Libretto mailing list
   >http://www.silverace.com/libretto/ - Archives
   >-------TO UNSUBSCRIBE-------
   >Reply to any of the list messages. The reply mail should be
   >on the message's subject line: cmd:unsubscribe
   >--------TO UNSUBSCRIBE DIGEST------
   >Do above but with this on subject line: cmd:unsubscribe digest
   >**************************************************************
   >**************************************************************
   >http://libretto.basiclink.com - Libretto mailing list
   >http://www.silverace.com/libretto/ - Archives
   >-------TO UNSUBSCRIBE-------
   >Reply to any of the list messages. The reply mail should be
   >on the message's subject line: cmd:unsubscribe
   >--------TO UNSUBSCRIBE DIGEST------
   >Do above but with this on subject line: cmd:unsubscribe digest
   >**************************************************************

Net-Tamer V 1.12.0 - Test Drive





**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to