Date: Wed, 02 Oct 2002 15:51:40 -0400
From: Pres Waterman <[EMAIL PROTECTED]>
Subject: Re: [LIB] Suspend feature


>
> Can you see a 'hairy lightbulb' in the system tray? Whilst not absoluptly
> necessary, having it there enables you to do a lot of power management
> stuff that's specific to the Toshiba. Go to the toshiba website and have a
> hunt around for the power saving drivers.

Well, a "power save driver" for W98 is only 35k, and adds one VxD and a
power profile called "Toshiba" which sets all W98 power settings to OFF. You
STILL need the "accessories" package that contains the Hairy Light Bulb

Without them, AFAIK the only
> *reliable* way of going into suspend is to firstly tell your BIOS to use
> hibernation mode (or suspend mode depending on which you want) and in
> Windows control panel>power, change the power button function to
'suspend'.

Or "show suspend on taskbar" option

> Then when you want to hibernate or suspend, hold down the power button for
> LESS than 10 seconds (more than 10 seconds and it does a hard poweroff).

No, this does not work on the 50. You cannot hard-power off the 50 by
holding down the power button for many seconds, like you CAN on the L1x0
series. It is possible in the Hairly Light Bulb to set the panel button to
power, but since that is software if the whole O/S goes bad it will not
work. Many a time have I had to yank out the battery to get the L50's
attention, where holding the panel power button does the same thing on my
100/100...

I don't know if that abilty came in on the 60/70 series. Michael Berlant?

Thanks

Pres Waterman, W2PW
c/o 112 Motors, LLC
Long Island Ford, Kia and Used Dealer

GO BILLS!







**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to