Date: Wed, 23 Oct 2002 21:04:33 -0700 (PDT)
From: David Chien <[EMAIL PROTECTED]>
Subject: FYI: Getting the NewMedia SCSI/Sound combo PCMCIA card to work

zzzzz.... Notes for anyone buying this card cheap off ebay.com and wanting to
get it to work.

   5 minutes and it works fine.

   1) Win98se, L110, default install with Toshiba drivers.

   2) Insert card, let it auto detect & install drivers.  Reboot.
  
   3) Device manager, disable the Yamaha Libretto sound driver.
 
   4) manual configuration of the sound card -> IRQ 10 (or any free IRQ),
      I/O to the default.  Should be not conflicts with other devices,
otherwise
      try different #s for both, then click OK to enable.

   5) Poof!  Works just fine in Cool Edit Pro and Windows.

   ----

   Mic in on the device sucks.  Too much line noise.

   CD/line in works great.  No pops, noise, etc. to worry about, and works
great despite a relatively high -27db noise floor as shown in Cool Edit Pro. 
But nothing you really notice or hear with headphones with the sound up loud,
unlike the Mic in.

   CD/line in is  really nice (quiet) vs. the noisy internal mic and/or mic in
jack on the Libretto, and so much so, I'm thinking I'll have to go hunt down a
PCMCIA card for audio on the Libretto if I want noise free recordings.  Right
now, my L110 is just too noisy when recording voice through the
internal/external mic, even after trying to massage the noise out through a
good audio editor's noise reduction feature.

  d =)

=====
adorable toshiba libretto
The latest news and information for the Toshiba Libretto owner.
http://www.silverace.com/libretto/

__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/



**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to