Date: Mon, 21 Oct 2002 17:28:00 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Problems recording audio with L100c- Reworded
This is the same basic post as before, but hopefully worded a little more
clearly... Though with me... inevitably it's a tad longer:
I'm having problems figuring out to get this Libretto 100CT to record audio
with its internal Yamaha OPL3-SAx chip. The way I did this with an old New
Media WavJammer sound PC card on a 70CT was to double-click the volume icon
in the system tray, go to Options>Properties.
In the next window I set the radio button for �Adjust volume for� setting to
�Record�, and set 'Line' or 'Microphone' in the �Show that following volume
controls� configuration box. When I clicked OK, I got to the WavJammer
Recording Control window open. In that window I would click the 'Select' box
to select either 'Microphone' or 'Line' to feed the signal to the recording
software. If there was a signal being fed into the 70CT at that point, the
area to the right of the recording volume slider will display the signal
strength.
But when I do this same thing on my 100CT with the OPL3-SAx sound driver, I
get no signal to appear. With the �Microphone� selected in the recording
window, I'm assuming the internal microphone should pick up my voice at this
point. But it doesn't. With the line-out from a portable CD player plugged
into the line-in for the L100, and line-in selected in the recording window,
I don't get any signal displayed either. Niether is there any display of a
signal in my recording software.
These things can be tricky sometimes. Can anyone who's done this help me out
here?
Thanks,
Matt
_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband.
http://resourcecenter.msn.com/access/plans/freeactivation.asp
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
- Re: [LIB] Problems recording audio with L100c- Reworded Matthew Hanson
