Date: Tue, 22 Oct 2002 01:47:57 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: 100CT 32MB upgrade - yet another problem

After the 32MB RAM upgrade, for some reason Scandisk takes 5 to 8 times longer to run in DOS on the L100 now as it did without the upgrade.

I bought it on Ebay. No manufacturer name on the card. Just "Made in Japan, and some numbers.

I have a picture of this card, but can't figure out how to access my web space on the HotBox.ru account I set up.

After installing it and booting the system, I had one of my other problems kick in. My CF card reader was inserted, and froze the system one more time as it's been doing. But when the system rebooted, it took >forever< for Scandisk to run in DOS! (10-15 min) I took the RAM card out and purposely shut the OS down with the switch. Scandisk ran as quickly as ever without it!

Is this bad RAM? I thought this might have been why my 50 and 70 Libs ran scandisk slowly in DOS. So I pulled the 16MB card out of the 70, and shut it down with the power button. No difference... It still takes about 18 minutes to run Scandisk!! That's why I always set 'AutoScan=0' in msdos.sys, and run Scandisk in Windows faster.

Or do all Libbys run scandisk more slowly in DOS with the RAM upgrade? I'd think it'd run >faster<.


Matt

About to reformat C: and reload Win98.


_________________________________________________________________
Internet access plans that fit your lifestyle -- join MSN. http://resourcecenter.msn.com/access/plans/default.asp





**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to