Date: Fri, 25 Oct 2002 08:11:58 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Problems installing W98 on 100CT

From: Christian Gennerat <[EMAIL PROTECTED]>

Matthew Hanson wrote:

Date: Fri, 25 Oct 2002 05:54:42 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Problems installing W98 on 100CT

I was having problems with Win98 (not SE) freezing every time it checked for P&P components, rebooted, and started to set them up. And I was having a heck of a time getting the >right< sound drivers working. I had to reboot to finish installation
Maybe not a freeze, but a wait for 'floppy ready'
So, the first driver you have to install is the floppy driver
No floppy involved. Ran 'setup' from D:\Win98 partition installation directory.

Finally I realized I forgot to take the advice of a guy on the Compuserve support list... before anything, install the latest version of BIOS!

After setting up v8.1, W98 went right in. May have to do with something SE had overcome, as it installed with no problems. Problems after that were bacause Toshiba pointed me to the wrong sound drivers.
No change. you can install W98, even with an old BIOS (with a <8Gb disk)
Well W98 locked up at that same point every time I installed, re-installed trying to get the wrong sound driver set up after the OS installed. Upgraded to BIOS v8.1, and it resolved the problem. As is usually is the case with things like this, I have no clue why.

Matt


_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp





**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to