Date: Sat, 26 Oct 2002 10:08:27 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Confusion over W98 drivers for 100CT
In a message dated 10/26/02 1:03:00 AM Mountain Daylight Time, [EMAIL PROTECTED] writes: > >It is just two simple things... a .vxd and a power save profile, which > >basically tells Win98 to leave the machine in "always on" like mode... > > >never do anything. > > So it sound like I can skip this altogether... right? I don't think so. Though the W98 Power Saver Tosh upgrade does what Pres says, that profile is needed in the W98 Power Management program. And, I believe you must enable hibernation and set the lid and power button functions in Power Management for those to work properly under W98. > > >You ALSO want the hairy light bulb. That allows differing screen brightness > > >and processor speed, as well as different suspend/hibernate for lid closing > > >options based on battery or A/C, things that Win98's power management do > >not address. > > > >These are things that took me a long time to figure out. There was one > >other thing I wanted to mention, but it just slipped my mind. I will write > >in again if it comes back. > > Okay... so the hairy bulb is part of either the acessory or control drivers, > > probably 'control' as Lee pointed out. And one or the other are all I > really need to get the hairy bulb power utility. Yes, just W95 Controls. As I said - it must be loaded and set up BEFORE installing the Power Saver W98 upgrade. Lee ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
