Date: Tue, 19 Nov 2002 07:26:22 +0800 (CST) From: =?big5?q?tradelink=20tradelink?= <[EMAIL PROTECTED]> Subject: HELP!!!! My 50ct can't boot up suddenly after overclock!!!!!
I am now using IBM 6.4G harddisk Travelstar 6GN (model : DBCA-206480), it worked find until I overclocked my 50ct.... I cut the pin 15 of W48C54A chip last night and hope my 50ct will go up to 100MHz. My bad dream come..... My 50ct can't boot up again no matter I :- 1) boot up with floppy and "fdisk/mbr" or 2) boot up with floppy, delete my FAT partitions (I used to boot from FAT partition), recreate them and format/s the boot partition again I can complete all above operation without any error, but my libretto just can't bootup again with hd. I can even see the complete content in partition after I boot up with floppy(of course, before I format my hd). It's strange that when I swap 6.4G hd with the original 810Mb toshiba hd, it works again..... Is it due to the limitation of bios for handling large harddisk? (It should not be, since my hd works fine before I o/c) or due to overclock? Should I reconnect pin 15 to make it works again? Please help!!!! Alan from Hong Kong. _________________________________________________________ �H���ͼ��u#9351 �ܡu�͡v�N�� http://hk.yahoo.com/promotions/personals/9351 ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
