Date: Sun, 01 Dec 2002 10:36:25 -0500 From: Pres Waterman <[EMAIL PROTECTED]> Subject: Re: [LIB] Problem charging
> I am at a cabin in the north. It uses a solar panel to charge a 12 volt > 35000 mAh deep cycle battery and the battery provides the electrical system > for the cabin. I am plugging my 100CT in using a targus universal auto > adapter. However the Libby never seems to reach a full charge. I assume the Targus is set to put out 15v? That is necessary to charge the Libretto, regardless of the source ( 12v, 110v mains... ) etc. My cell phone > reaches a full charge just fine. The Libby battery level never when I use it > on the adapter. I don't have a multimeter or breakout box to measure what is > going into the Libby. Does anyone know of a utility that measures the > voltage and current of the power coming into the Libretto or know how to do > it in assembly, C or basic? I have thbose programming languages availible on > my Libretto. \ AFIK there is no actual voltage monitor in the Libretto BIOS and I am sure there is no current monitor. But then again, Windows is somewhat aware of the battery status. Anyone know how smart the battery is, vs. the internal battery monitors in the computer? Thanks Pres Waterman, W2PW GO BILLS! ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
