Date: Sun, 8 Dec 2002 15:31:05 +0800 (CST) From: =?big5?q?tradelink=20tradelink?= <[EMAIL PROTECTED]> Subject: HELP!!! Toshiba 12G (MK1214GAP) + 50CT
I found that doesn't work and my harddisk simply doesn't boot after memory counting!! So I search the mail list archive and found an article about how to make MK1214GAP work with 70CT, the author is Dave Marsh:- http://www.technoir.nu/libretto/list/2000/msg00293.html I face the exact problem as described is this article and think the solution should work with 50CT also. Does anyone get it work on 50CT? As mentioned in the article, shorting pin 28 of MK1214GAP to ground is the way to go. Btu, where can I find pin layout of MK1214GAP or 50CT hdd connector? Which pin should I really short to ground? Should I short the MK1214GAP or short the hdd connector on 50CT? Please advise!! _________________________________________________________ Lonely Christmas(������)�A����P��(Twins)�A�������\(���d�_)... Over 800 latest ringtones, only on Yahoo! http://ringtone.yahoo.com.hk ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
