Date: Sun, 19 Jan 2003 17:48:33 EST From: [EMAIL PROTECTED] Subject: Re: [LIB] Power Xtender adapter cable
In a message dated 1/19/2003 3:03:03 PM Mountain Standard Time, [EMAIL PROTECTED] writes: << I've got a chance to get a Power Xtender air/auto power adapter for a good price but it's for the Libby L50/L70 and I need the adapter cable for an L110. Upon checking the website for the appropriate cable I see that they are pretty expensive (much more than I'm paying for the power unit!). Perchance does anyone on the list need the L70 adapter cable in trade for the L100/L110 cable - I know it's a long shot but it doesn't hurt to ask? Failing that, does anyone have the L100/L110 cable they'll sell me? Or, has anyone had any luck transplanting the L110 plug to another cable in a way that it is durable? Chester >> Chester, I took my L100CT to Europe last year and faced the same issue. Using microphone cable connectors (because they are connection-polarized) I made up swappable cable ends for the PA2501 AC supply and my L50/70 auto/air adapter. You'll need 2 connectors of one gender (for the 2 power supplies) and one of the other gender (for the pigtail with L100/110 connector.) Of course you'll have to cut (ouch) the output wire of the PA2501 power supply to make this work. The mic connectors are available in lots of configurations at electronics supply stores. Mine were 3-wire, so one plug/jack pair is unused. Whichever power source you use, you just swap the pigtail onto it. Very convenient, and no worries about frying the Libretto due to polarity uncertainties. And the mic connectors are super-durable. Lee ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
