Date: Thu, 27 Feb 2003 09:45:23 -0500 From: "Lawrence Young" <[EMAIL PROTECTED]> Subject: Re: [LIB] DMA on Libretto 100 ?
L100 does not support DMA on HDD. It's an old EIDE interface only. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Wednesday, February 26, 2003 10:06 PM Subject: [LIB] DMA on Libretto 100 ? Date: Tue, 25 Feb 2003 13:05:35 -0600 From: [EMAIL PROTECTED] Subject: DMA on Libretto 100 ? Hello, Does the Libretto 100 support DMA on its HDD under win98 ? I cannot find any hard disk drives listed in device mangler, nor a setting for DMA under the HDD controller... The disk controller is the default M$ one. Do I need to install some other driver ? Thanks ! Konrad Szwab, EE Systems Engineer / Network Administrator Alcon Houston, (713) 295 4329 ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
