Date: Thu, 25 Sep 2003 00:19:02 +0200
From: "T. Ribbrock" <[EMAIL PROTECTED]>
Subject: Re: Hardware failure on 110CT
On Thu, Sep 18, 2003 at 05:31:14AM -0700, David Hettel wrote:
> You just might try pulling the memory, (under they keyboard) and try
> booting. I have seen on both the 100 and the 110, where the additional
> memory, seems to work itself loose, and the Libby will fail to boot. Pulling
> the memory and reinserting it, seems to fix this, for me.
Hm, my last mail didn't seem to make it... I swapped the 32MB bord
with the one I had in my 100CT - up until now, the 110CT is running
fine, no matter what I do with it (move, tilt display, light taps).
So, it *seems* to be the solution - THANKS!
Cheerio,
Thomas
--
-----------------------------------------------------------------------------
Thomas Ribbrock http://www.ribbrock.org
"You have to live on the edge of reality - to make your dreams come true!"
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
