Date: Wed, 29 Oct 2003 13:23:18 -0500 From: "Larry Fieman" <[EMAIL PROTECTED]> Subject: Overclock L50 problem.
I was able to take apart the L50. It turned out to have a P75, rather than the hoped for P120. I cut pin 15, lightly coated the little square where the heat shield contacts the CPU with heatsink grease, and re-assembled. An engineer friend made a quick stab at dioding for 133, but stopped. We decided that I should see how the first step did before proceeding further. He also suggested that I sharpen my 15-watt RS soldering iron with a file so that it would be easier to use. Now, when I plug it in the green on light lights up, but when I press the button nothing happens. I am going to take it apart and reassemble. Any idea what might be going on? Thanks, Larry "hope its not fried" Fieman ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
