Date: Fri, 19 Mar 2004 17:12:58 -0000 From: "Malcolm Lander" <[EMAIL PROTECTED]> Subject: Re: [LIB] Will 4.3G into 50CT go please?
> Anyone in the UK got a 100/110 for sale ..? check out.... http://search.ebay.co.uk/ws/search/SaleSearch?basicsearch=&salocatedincountry=3&ht=1&sosortproperty=1&satitle=toshiba+libretto&from=R9 rgds Malcolm ----- Original Message ----- From: "T i m" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Thursday, March 18, 2004 9:05 PM Subject: Re: [LIB] Will 4.3G into 50CT go please? > Date: Thu, 18 Mar 2004 21:05:05 +0000 > From: T i m <[EMAIL PROTECTED]> > Subject: Re: [LIB] Will 4.3G into 50CT go please? > > "Fisher, Dave (IBM)" wrote: > > > > > I've had a 9.5mm drive fitted in my Lib50 without issues... a 4.3gb will be > > fine and you'll be able to use all (except for the hiberntation partition at > > the end of course) of the drive normally. Just partition with DOS FDISK and > > Robert is your fathers brother. > > [T] Hi Dave, and thanks very much for all your time and effort on this. ;-) And > Bob *is* actually my uncle! > > > Larger hard drives are fine too... I had a 20Gb in my Lib 50CT. It gets > > trickier due to the hibernation partition being around the 8gb mark but you > > can work around it fairly easily. > > [T] Ok .. > > > > > For example, use DOS FDISK to create a 2Gb boot partition for Win98, then > > create as large a second primary partition as you can. > > > <snip good info> > > > > If you do it this way there is no need for any nasty overlay software and > > it's worked perfectly well on both my old Lib 50 and my new-ish Lib100CT. > > [T] Brilliant. Thanks again .. > > Although .. I *think* I would like something as small as the 50CT (or nearly as > small) with USB and PCMCIA (CardBus would be nice though) that comes (or has the > option on ) 64M RAM and a 4+G drive? > > What I could then do is sell my 50CT and upgrade to something better > (100/110CT)?. > > The *problem* is all the 50/70 kit I've got that won't be any use on something > else? > > All the best .. > > T i m > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
