Date: Tue, 01 Jun 2004 06:21:55 -0700 From: Mark Srebnik <[EMAIL PROTECTED]> Subject: Re: [LIB] Re: EZ-Drive installer - WORKED!
Good point Matt! Hadn't thought about that.... ;-) Thanks, Mark on 6/1/04 12:29 AM, Matt Hanson at [EMAIL PROTECTED] wrote: > Date: Tue, 01 Jun 2004 07:29:23 +0000 > From: "Matt Hanson" <[EMAIL PROTECTED]> > Subject: RE: [LIB] Re: EZ-Drive installer - WORKED! > > Okay Mark... great! One more case study for the argument for installing > drive overlay even though the Windows OSs don't always need it. This > confirms again that if you're going to do imaging or partitioning within a > Windows OS on a >8GB HDD, drive overlay is going to be needed. > > Now make sure you set aside 32MB+ for the 50/70 or 62MB+ partition space for > the 100/110 around the 8GB boundry so your Lib doesn't write over data there > if it's ever forced into hibernation. Lots of recent posts on that > procedure in the archives. > > Matt > > >> From: Mark Srebnik <[EMAIL PROTECTED]> >> >> That did it Matt! >> >> PartitionMagic reports partitions are fine now and DriveImage worked great! >> >> Thanks!!! >> >> Mark >> >> on 5/31/04 1:23 AM, Matt Hanson at [EMAIL PROTECTED] wrote: >> >>>> From: Mark Srebnik <[EMAIL PROTECTED]> >>>> >>>> Could you please send it?? >>> >>> Here you go Mark. Unzip and run the .eze and run it to create a boot >> floppy >>> that will install EZ-Drive. You can follow my instructions from my last >>> post... but here's a bit more about some menus I wasn't clear on: >>> >>> EZ-BIOS Setup: >>> --------------------------------- [SNIP] >>> >>> Get back to me with a post to the list, this going right to you. >>> >>> Good luck. >>> >>> Matt ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
