Date: Tue, 1 Jun 2004 13:33:58 -0700 (PDT)
From: Jim Drouillard <[EMAIL PROTECTED]>
Subject: Re: [LIB] 50/70 plug dimensions part# needed
Without waiting for your embarassing revelation I'll
post some info:
Targus/ChargeSource PowerTip for Lib 50/70 is #6 or
#114 (higher current rating?).
This is the same one indicated for the Portege 660CDT
(which I have); it is a 6.3/3.0mm "barrel" or "coax"
plug.
I have power supplies with 6.3/3.0mm and 6.5/3.0mm
plugs that work with the 660CDT; Toshiba's 15V
supplies (PA2484U and PA2438U) seem to be the 6.3mm
variety so that is the jack I would get if there is
any question.
Jim
====================================================
Date: Sun, 30 May 2004 21:24:43 +0000
From: "Matt Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] 50/70 plug dimensions part# needed
---> SNIP <---
After all the discussion about dimensions for the
50/70
power
plugs, I came to an incredibly embarassing
revelation... I'll report
back on
that later through.
---> SNIP <---
======================================================
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
