Date: Wed, 01 Sep 2004 20:56:58 +0200 From: Stefan Katletz <[EMAIL PROTECTED]> Subject: Re: [LIB] 50CT and hibernation
Hi Sean, that's why I left a gap from cylinder 1017 to 1029, that's roughly 109MB and should be more than enough. Initially it was smaller, but then I had data corruption after hibernation. At least it doesn't write into the linux partition anymore... As Christian wrote, this shouldn't be the problem anyway. How do I hibernate under win98se? Maybe the bios of the 50ct doesn't support hibernation on large hard disks (>8GB)? regards stefan On Wed, 2004-09-01 at 14:30, [EMAIL PROTECTED] wrote: > Date: Wed, 1 Sep 2004 8:28:46 -0400 > From: <[EMAIL PROTECTED]> > Subject: Re: [LIB] 50CT and hibernation > > Stefan- > It looks as though you made your end partition a linux one-it shouldn't be formatted > as anything, just blank/empy space. At least that's what I've always done. I usually > leave 50megs just to be on the safe side. > Sean ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
