Date: Mon, 06 Nov 2006 22:52:32 +0100
From: "Anders Nordin" <[EMAIL PROTECTED]>
Subject: 100/110ct questions about 75mhz bus speed and 96mb RAM
Hi!
I'm one of the few who have tried running a 100ct at 300mhz at 75mhz bus
speed (4x75mhz).
It was ok for a couple of hours or so, but then began to restart before the
OS had finished loading.
After that, a guy helped me to put cooling paste on the processorÂ’s own
paste and I'm thinking of trying 300mhz again and see if it might work
better now. I know of a guy who was able to run his 110ct at 300mhz
(although it was hot, I think).
But even if 300mhz would still not work for me, it might just be the
processor that can't handle the extra speed. So I'm thinking about keeping
the bus speed at 75mhz, but change the multiplier to 3,5x instead. 75x3,5 =
263mhz. I'm sure that the extra bus speed would increase the performance of
the libretto quite well in comparison to 66x4 = 266mhz.
Has anybody tried 75x3,5?? Did it work?
I also have the 64mb memory module for Portege 3110CT which could work with
the 100ct. But a connector is in the way (might be easy to trim down) and
the memory module is too big for the Libretto cover.
Has anybody moved the connector that is in the way and cut of a piece of the
libretto to fit the memory module? Did it all work? 96mb of total RAM?
/Anders
_________________________________________________________________
Dags att flytta till större? http://sokbostad.msn.se
