Date: Sun, 24 Dec 2006 00:37:17 +0100
From: "Avi Cohen Stuart" <[EMAIL PROTECTED]>
Subject: RE: [LIB] Margi DVD-to-Go card works!

You should be able to play full DVD's including the menu structure.
For the audio, be sure you have the correct driver and find that ZV port
toggle!

The difference in my driver is that it doesn't use Kernel Stream
Synchronization when using the kernel streams. (don't ask) Also it
modifies a timeout value somewhere. 
Use at own risk :-)

Note that a large part of the DVD menu handling is being done by Windows
in the Kernel Streaming (KS) software. The Margi only does the hardware
decoding. The DVDplay.exe sets up the kernel streams etc and sends
events like play, menu etc. to the KS modules.

Me thinks that I had audio running with SE as well. BE SURE TO FIND THE
ZV PORT ENABLE :-)
That will do the audio trick. It should be hidden somewhere in the
Advanced settings of your audio volume controls. (I hope. SE was a very
long time ago...)

Avi. 

> -----Original Message-----
> From: Michael Heathcote [mailto:[EMAIL PROTECTED] 
> Sent: Sunday, 24 December, 2006 0:16
> To: Libretto
> Subject: RE: [LIB] Margi DVD-to-Go card works!
> 
> Date: Sat, 23 Dec 2006 23:16:15 -0000
> From: "Michael Heathcote" <[EMAIL PROTECTED]>
> Subject: RE: [LIB] Margi DVD-to-Go card works!
> 
> I'm getting nearer using 98SE!
> I am now using the WDM driver/software set very slightly a 
> higher version number v1.05.1063 that works...partly!
> I have seamless video, again using my external DVD-ROM drive, 
> but no audio.
> Also I can't play DVD's with a menu structure, only my own 
> DVD's that play without an opening menu? wheird!
> I will have to now check a few things following your post 
> Avi....what are the slight mods that you have made to your 
> WDM driver listed on your web site?
> I assume that you have the DVD-to-Go working normally with 
> video & audio on your libretto with 98SE installed?
> The fact that I can now get seamless video playback (only) 
> using 98SE is pushing me to crack this one!
> Cheers,
> Mike.
> 
> 
> 
> 
> 


Reply via email to