This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Libtool".
The branch, master has been updated
via 0da7d80909d02b7b13cb7d24e5318d38bf6d96bc (commit)
from 448445c6f8767ca83d019c126fdf894b927792fe (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 0da7d80909d02b7b13cb7d24e5318d38bf6d96bc
Author: Gary V. Vaughan <g...@gnu.org>
Date: Mon Jun 28 06:06:22 2010 +0700
Add func_append_quoted and do inline func_append substitutions.
* libtool/config/ltmain.m4sh: Replace all occurrences of
`foo="$foo bar"' with func_append. No decorator comment was
added since /func_append [a-zA-Z0-9_]* "/ is already an
excellent match regexp, and additional comments would only
complicate things.
(func_append_quoted): New function that quotes a value with
func_quote_for_eval before appending it. To avoid quoting the
whitespace in the passed value, a single whitespace is added
automatically. Changed callers where possible.
* libtool/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Perform a
`+=' implementation substitution for func_append_quoted. More
importantly, systematically replace matching func_append calls
with inline `+=' when supported (for maximum speed), and
longhand `foo="$foo bar"' otherwise to avoid the function
overhead.
Signed-off-by: Gary V. Vaughan <g...@gnu.org>
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 17 ++
libltdl/config/ltmain.m4sh | 455 ++++++++++++++++++++++----------------------
libltdl/m4/libtool.m4 | 17 ++
3 files changed, 263 insertions(+), 226 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index cf3af83..e939f43 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,22 @@
2010-06-28 Gary V. Vaughan <g...@gnu.org>
+ Add func_append_quoted and do inline func_append substitutions.
+ * libtool/config/ltmain.m4sh: Replace all occurrences of
+ `foo="$foo bar"' with func_append. No decorator comment was
+ added since /func_append [a-zA-Z0-9_]* "/ is already an
+ excellent match regexp, and additional comments would only
+ complicate things.
+ (func_append_quoted): New function that quotes a value with
+ func_quote_for_eval before appending it. To avoid quoting the
+ whitespace in the passed value, a single whitespace is added
+ automatically. Changed callers where possible.
+ * libtool/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Perform a
+ `+=' implementation substitution for func_append_quoted. More
+ importantly, systematically replace matching func_append calls
+ with inline `+=' when supported (for maximum speed), and
+ longhand `foo="$foo bar"' otherwise to avoid the function
+ overhead.
+
Add an XSI replacement for func_split_short_opt, with test cases.
* libltdl/config/getopt.m4sh (m4go_shortnoargs): Remove 'v' now
that getopt.m4sh doesn't steal that letter for the --version
diff --git a/libltdl/config/ltmain.m4sh b/libltdl/config/ltmain.m4sh
index 217643d..46a8aa3 100644
--- a/libltdl/config/ltmain.m4sh
+++ b/libltdl/config/ltmain.m4sh
@@ -156,6 +156,14 @@ func_append ()
eval "${1}=\$${1}\${2}"
} # func_append may be replaced by XSI optimised implementation
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1} \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by XSI optimised implementation
+
# func_arith arithmetic-term...
func_arith ()
@@ -364,24 +372,24 @@ M4SH_GETOPTS(
;;
esac],
[], [--no-silent|--no-quiet], [false], [
- preserve_args="$preserve_args $opt"],
+ func_append preserve_args " $opt"],
[], [--no-verbose], [false], [
- preserve_args="$preserve_args $opt"],
+ func_append preserve_args " $opt"],
[], [--silent|--quiet], [], [
- preserve_args="$preserve_args $opt"
+ func_append preserve_args " $opt"
opt_verbose=false],
[v], [--verbose], [], [
- preserve_args="$preserve_args $opt"
+ func_append preserve_args " $opt"
opt_silent=false],
[!], [--tag], [], [
- preserve_args="$preserve_args $opt $optarg"
+ func_append preserve_args " $opt $optarg"
func_enable_tag "$optarg"],
[
# save first non-option argument
nonopt="$opt"; shift
# preserve --debug
- $opt_debug && preserve_args="$preserve_args --debug"
+ $opt_debug && func_append preserve_args " --debug"
case $host in
*cygwin* | *mingw* | *pw32* | *cegcc*)
@@ -548,8 +556,7 @@ func_infer_tag ()
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
@@ -568,8 +575,7 @@ func_infer_tag ()
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
@@ -678,12 +684,12 @@ func_mode_compile ()
;;
-pie | -fpie | -fPIE)
- pie_flag="$pie_flag $arg"
+ func_append pie_flag " $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
+ func_append later " $arg"
continue
;;
@@ -704,15 +710,14 @@ func_mode_compile ()
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
- func_quote_for_eval "$arg"
- lastarg="$lastarg $func_quote_for_eval_result"
+ func_append lastarg " $arg"
done
IFS="$save_ifs"
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
+ func_append base_compile " $lastarg"
continue
;;
@@ -728,8 +733,7 @@ func_mode_compile ()
esac # case $arg_mode
# Aesthetically quote the previous argument.
- func_quote_for_eval "$lastarg"
- base_compile="$base_compile $func_quote_for_eval_result"
+ func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
@@ -860,12 +864,12 @@ compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
- removelist="$removelist $output_obj"
+ func_append removelist " $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
- removelist="$removelist $lockfile"
+ func_append removelist " $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
if test -n "$fix_srcfile_path"; then
@@ -890,7 +894,7 @@ compiler."
if test -z "$output_obj"; then
# Place PIC objects in $objdir
- command="$command -o $lobj"
+ func_append command " -o $lobj"
fi
func_show_eval_locale "$command" \
@@ -937,11 +941,11 @@ compiler."
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
+ func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
+ func_append command "$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
@@ -1246,7 +1250,7 @@ func_mode_execute ()
dir="$func_dirname_result"
if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
+ func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'"
@@ -1303,8 +1307,7 @@ func_mode_execute ()
;;
esac
# Quote arguments (to preserve shell metacharacters).
- func_quote_for_eval "$file"
- args="$args $func_quote_for_eval_result"
+ func_append_quoted args "$file"
done
if test "X$opt_dry_run" = Xfalse; then
@@ -1349,7 +1352,7 @@ func_mode_finish ()
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for dir
do
- libdirs="$libdirs $dir"
+ func_append libdirs " $dir"
done
for libdir in $libdirs; do
@@ -1361,7 +1364,7 @@ func_mode_finish ()
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
@@ -1441,7 +1444,7 @@ func_mode_install ()
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
- install_prog="$install_prog$func_quote_for_eval_result"
+ func_append install_prog "$func_quote_for_eval_result"
install_shared_prog=$install_prog
case " $install_prog " in
*[\\\ /]cp\ *) install_cp=: ;;
@@ -1461,7 +1464,7 @@ func_mode_install ()
do
arg2=
if test -n "$dest"; then
- files="$files $dest"
+ func_append files " $dest"
dest=$arg
continue
fi
@@ -1499,11 +1502,11 @@ func_mode_install ()
# Aesthetically quote the argument.
func_quote_for_eval "$arg"
- install_prog="$install_prog $func_quote_for_eval_result"
+ func_append install_prog " $func_quote_for_eval_result"
if test -n "$arg2"; then
func_quote_for_eval "$arg2"
fi
- install_shared_prog="$install_shared_prog $func_quote_for_eval_result"
+ func_append install_shared_prog " $func_quote_for_eval_result"
done
test -z "$install_prog" && \
@@ -1515,7 +1518,7 @@ func_mode_install ()
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
func_quote_for_eval "$install_override_mode"
- install_shared_prog="$install_shared_prog -m
$func_quote_for_eval_result"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
fi
fi
@@ -1573,7 +1576,7 @@ func_mode_install ()
case $file in
*.$libext)
# Do the static libraries later.
- staticlibs="$staticlibs $file"
+ func_append staticlibs " $file"
;;
*.la)
@@ -1590,19 +1593,19 @@ func_mode_install ()
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
+ *) func_append current_libdirs " $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
+ *) func_append future_libdirs " $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir="$func_dirname_result"
- dir="$dir$objdir"
+ func_append dir "$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
@@ -1679,7 +1682,7 @@ func_mode_install ()
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
;;
*.lo)
@@ -2100,7 +2103,7 @@ static const void *lt_preloaded_setup() {
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
- *) symtab_cflags="$symtab_cflags $arg" ;;
+ *) func_append symtab_cflags " $arg" ;;
esac
done
@@ -2297,7 +2300,7 @@ func_extract_archives ()
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name
\*.lo -print | sort | $NL2SP`
+ func_append my_oldobjs " "`find $my_xdir -name \*.$objext -print -o
-name \*.lo -print | sort | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
@@ -3890,9 +3893,9 @@ func_mode_link ()
;;
*)
if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $arg"
else
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $arg"
fi
prev=
continue
@@ -3916,7 +3919,7 @@ func_mode_link ()
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+ *) func_append deplibs " $qarg.ltframework" # this is fixed
later
;;
esac
;;
@@ -3935,7 +3938,7 @@ func_mode_link ()
moreargs=
for fil in `cat "$save_arg"`
do
-# moreargs="$moreargs $fil"
+# func_append moreargs " $fil"
arg=$fil
# A libtool-controlled object.
@@ -3964,7 +3967,7 @@ func_mode_link ()
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test
"$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -3976,7 +3979,7 @@ func_mode_link ()
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4046,12 +4049,12 @@ func_mode_link ()
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
+ *) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
+ *) func_append xrpath " $arg" ;;
esac
fi
prev=
@@ -4063,28 +4066,28 @@ func_mode_link ()
continue
;;
weak)
- weak_libs="$weak_libs $arg"
+ func_append weak_libs " $arg"
prev=
continue
;;
xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
- compiler_flags="$compiler_flags $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
@@ -4197,8 +4200,8 @@ func_mode_link ()
case "$deplibs " in
*" -L$dir "*) ;;
*)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
+ func_append deplibs " -L$dir"
+ func_append lib_search_path " $dir"
;;
esac
case $host in
@@ -4207,12 +4210,12 @@ func_mode_link ()
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
- *) dllsearchpath="$dllsearchpath:$dir";;
+ *) func_append dllsearchpath ":$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -4236,7 +4239,7 @@ func_mode_link ()
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
@@ -4256,7 +4259,7 @@ func_mode_link ()
;;
esac
fi
- deplibs="$deplibs $arg"
+ func_append deplibs " $arg"
continue
;;
@@ -4269,7 +4272,7 @@ func_mode_link ()
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
-model|-arch|-isysroot)
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
@@ -4277,12 +4280,12 @@ func_mode_link ()
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
esac
continue
;;
@@ -4355,7 +4358,7 @@ func_mode_link ()
esac
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
continue
;;
@@ -4408,8 +4411,8 @@ func_mode_link ()
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $func_quote_for_eval_result"
- compiler_flags="$compiler_flags $func_quote_for_eval_result"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4424,9 +4427,9 @@ func_mode_link ()
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $wl$func_quote_for_eval_result"
- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
- linker_flags="$linker_flags $func_quote_for_eval_result"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4471,7 +4474,7 @@ func_mode_link ()
arg="$func_quote_for_eval_result"
func_append compile_command " $arg"
func_append finalize_command " $arg"
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
continue
;;
@@ -4483,7 +4486,7 @@ func_mode_link ()
*.$objext)
# A standard object.
- objs="$objs $arg"
+ func_append objs " $arg"
;;
*.lo)
@@ -4514,7 +4517,7 @@ func_mode_link ()
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" =
yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -4526,7 +4529,7 @@ func_mode_link ()
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4571,8 +4574,8 @@ func_mode_link ()
*.$libext)
# An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
continue
;;
@@ -4581,14 +4584,14 @@ func_mode_link ()
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $arg"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $arg"
prev=
else
- deplibs="$deplibs $arg"
+ func_append deplibs " $arg"
fi
continue
;;
@@ -4657,10 +4660,10 @@ func_mode_link ()
for deplib in $deplibs; do
if $opt_preserve_dup_deps ; then
case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- libs="$libs $deplib"
+ func_append libs " $deplib"
done
if test "$linkmode" = lib; then
@@ -4673,9 +4676,9 @@ func_mode_link ()
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps"
;;
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
+ func_append pre_post_deps " $pre_post_dep"
done
fi
pre_post_deps=
@@ -4753,7 +4756,7 @@ func_mode_link ()
deplib_base=$func_basename_result
case " $weak_libs " in
*" $deplib_base "*) ;;
- *) deplibs="$deplibs $deplib" ;;
+ *) func_append deplibs " $deplib" ;;
esac
done
done
@@ -4774,11 +4777,11 @@ func_mode_link ()
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- compiler_flags="$compiler_flags $deplib"
+ func_append compiler_flags " $deplib"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags
$deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -4863,7 +4866,7 @@ func_mode_link ()
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags
$deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -4876,7 +4879,7 @@ func_mode_link ()
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_append newlib_search_path " $func_stripname_result"
;;
prog)
if test "$pass" = conv; then
@@ -4890,7 +4893,7 @@ func_mode_link ()
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_append newlib_search_path " $func_stripname_result"
;;
*)
func_warning "\`-L' is ignored for archives/objects"
@@ -4905,7 +4908,7 @@ func_mode_link ()
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
@@ -4974,11 +4977,11 @@ func_mode_link ()
if test "$pass" = dlpreopen || test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
+ func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- newdlfiles="$newdlfiles $deplib"
+ func_append newdlfiles " $deplib"
fi
fi
continue
@@ -5024,7 +5027,7 @@ func_mode_link ()
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
- *) new_inherited_linker_flags="$new_inherited_linker_flags
$tmp_inherited_linker_flag";;
+ *) func_append new_inherited_linker_flags "
$tmp_inherited_linker_flag";;
esac
done
fi
@@ -5032,8 +5035,8 @@ func_mode_link ()
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
if test "$pass" = conv; then
@@ -5044,8 +5047,8 @@ func_mode_link ()
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
fi
@@ -5054,10 +5057,10 @@ func_mode_link ()
deplibs="$deplib $deplibs"
if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done
continue
fi # $pass = conv
@@ -5084,9 +5087,9 @@ func_mode_link ()
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
+ func_append dlprefiles " $lib $dependency_libs"
else
- newdlfiles="$newdlfiles $lib"
+ func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
@@ -5123,12 +5126,12 @@ func_mode_link ()
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
@@ -5142,16 +5145,16 @@ func_mode_link ()
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
+ func_append newdlprefiles " $dir/$old_library"
# Keep a list of preopened convenience libraries to check
# that they are being used correctly in the link pass.
test -z "$libdir" && \
- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+ func_append dlpreconveniencelibs " $dir/$old_library"
# Otherwise, use the dlname, so that lt_dlopen finds it.
elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
+ func_append newdlprefiles " $dir/$dlname"
else
- newdlprefiles="$newdlprefiles $dir/$linklib"
+ func_append newdlprefiles " $dir/$linklib"
fi
fi # $pass = dlpreopen
@@ -5170,7 +5173,7 @@ func_mode_link ()
if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
+ func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
@@ -5183,7 +5186,7 @@ func_mode_link ()
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_append newlib_search_path " $func_stripname_result"
;;
esac
# Need to link against all dependency_libs?
@@ -5196,10 +5199,10 @@ func_mode_link ()
fi
if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
@@ -5214,7 +5217,7 @@ func_mode_link ()
# Make sure the rpath contains only unique directories.
case "$temp_rpath:" in
*"$absdir:"*) ;;
- *) temp_rpath="$temp_rpath$absdir:" ;;
+ *) func_append temp_rpath "$absdir:" ;;
esac
fi
@@ -5226,7 +5229,7 @@ func_mode_link ()
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir" ;;
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5235,7 +5238,7 @@ func_mode_link ()
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5260,12 +5263,12 @@ func_mode_link ()
case $host in
*cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=yes
fi
;;
@@ -5300,7 +5303,7 @@ func_mode_link ()
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir" ;;
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5309,7 +5312,7 @@ func_mode_link ()
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5419,7 +5422,7 @@ func_mode_link ()
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5441,7 +5444,7 @@ func_mode_link ()
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
@@ -5455,7 +5458,7 @@ func_mode_link ()
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
@@ -5475,7 +5478,7 @@ func_mode_link ()
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
@@ -5492,7 +5495,7 @@ func_mode_link ()
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5569,15 +5572,15 @@ func_mode_link ()
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
+ *) func_append xrpath " $temp_xrpath";;
esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
+ *) func_append temp_deplibs " $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
- newlib_search_path="$newlib_search_path $absdir"
+ func_append newlib_search_path " $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname
$newdependency_libs"
# ... and its dependency_libs
@@ -5586,10 +5589,10 @@ func_mode_link ()
newdependency_libs="$deplib $newdependency_libs"
if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done
if test "$link_all_deplibs" != no; then
@@ -5627,8 +5630,8 @@ func_mode_link ()
if test -z "$darwin_install_name"; then
darwin_install_name=`${OTOOL64} -L $depdepl | awk
'{if (NR == 2) {print $1;exit}}'`
fi
- compiler_flags="$compiler_flags ${wl}-dylib_file
${wl}${darwin_install_name}:${depdepl}"
- linker_flags="$linker_flags -dylib_file
${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " ${wl}-dylib_file
${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file
${darwin_install_name}:${depdepl}"
path=
fi
fi
@@ -5661,7 +5664,7 @@ func_mode_link ()
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
- compiler_flags="$compiler_flags "`$ECHO "
$new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework
\1%g'`
+ func_append compiler_flags " "`$ECHO " $new_inherited_linker_flags" |
$SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs="$newdependency_libs"
@@ -5678,7 +5681,7 @@ func_mode_link ()
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
+ *) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
@@ -5736,10 +5739,10 @@ func_mode_link ()
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
@@ -5755,7 +5758,7 @@ func_mode_link ()
;;
esac
if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
+ func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
@@ -5796,7 +5799,7 @@ func_mode_link ()
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
- objs="$objs$old_deplibs"
+ func_append objs "$old_deplibs"
;;
lib)
@@ -5832,7 +5835,7 @@ func_mode_link ()
echo
$ECHO "*** Warning: Linking the shared library $output against the
non-libtool"
$ECHO "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
+ func_append libobjs " $objs"
fi
fi
@@ -6030,7 +6033,7 @@ func_mode_link ()
done
# Make executables depend on our current version.
- verstring="$verstring:${current}.0"
+ func_append verstring ":${current}.0"
;;
qnx)
@@ -6098,7 +6101,7 @@ func_mode_link ()
fi
func_generate_dlsyms "$libname" "$libname" "yes"
- libobjs="$libobjs $symfileobj"
+ func_append libobjs " $symfileobj"
test "X$libobjs" = "X " && libobjs=
if test "$opt_mode" != relink; then
@@ -6117,7 +6120,7 @@ func_mode_link ()
continue
fi
fi
- removelist="$removelist $p"
+ func_append removelist " $p"
;;
*) ;;
esac
@@ -6128,7 +6131,7 @@ func_mode_link ()
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" !=
convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
+ func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d;
$lo2o" | $NL2SP`
@@ -6145,10 +6148,10 @@ func_mode_link ()
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
+ func_append temp_xrpath " -R$libdir"
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes;
then
@@ -6162,7 +6165,7 @@ func_mode_link ()
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
+ *) func_append dlfiles " $lib" ;;
esac
done
@@ -6172,7 +6175,7 @@ func_mode_link ()
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
+ *) func_append dlprefiles " $lib" ;;
esac
done
@@ -6184,7 +6187,7 @@ func_mode_link ()
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
@@ -6201,7 +6204,7 @@ func_mode_link ()
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
+ func_append deplibs " -lc"
fi
;;
esac
@@ -6250,7 +6253,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6261,7 +6264,7 @@ EOF
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
echo
@@ -6275,7 +6278,7 @@ EOF
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6293,7 +6296,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes"
; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6304,7 +6307,7 @@ EOF
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ;
then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
echo
@@ -6326,7 +6329,7 @@ EOF
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6343,7 +6346,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
@@ -6386,7 +6389,7 @@ EOF
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6411,7 +6414,7 @@ EOF
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
@@ -6427,7 +6430,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
@@ -6440,7 +6443,7 @@ EOF
potlib="$potent_lib" # see symlink-check above in
file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6465,7 +6468,7 @@ EOF
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
@@ -6569,7 +6572,7 @@ EOF
*)
case " $deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs "_libs -L$path/$objdir" ;;
esac
;;
esac
@@ -6579,10 +6582,10 @@ EOF
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
deplibs="$new_libs"
@@ -6611,18 +6614,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs
"$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
+ func_append dep_rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_apped perm_rpath " $libdir" ;;
esac
fi
done
@@ -6640,7 +6643,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
@@ -6674,7 +6677,7 @@ EOF
linknames=
for link
do
- linknames="$linknames $link"
+ func_append linknames " $link"
done
# Use standard objects if they are pic
@@ -6685,7 +6688,7 @@ EOF
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols="$output_objdir/$libname.uexp"
- delfiles="$delfiles $export_symbols"
+ func_append delfiles " $export_symbols"
fi
orig_export_symbols=
@@ -6756,7 +6759,7 @@ EOF
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([
\,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter <
$orig_export_symbols > $export_symbols
fi
@@ -6766,7 +6769,7 @@ EOF
case " $convenience " in
*" $test_deplib "*) ;;
*)
- tmp_deplibs="$tmp_deplibs $test_deplib"
+ func_append tmp_deplibs " $test_deplib"
;;
esac
done
@@ -6786,17 +6789,17 @@ EOF
test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
+ func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
@@ -6865,7 +6868,7 @@ EOF
$ECHO "$obj" >> $output
done
echo ')' >> $output
- delfiles="$delfiles $output"
+ func_append delfiles " $output"
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" &&
test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
func_verbose "creating linker input file list: $output"
@@ -6881,7 +6884,7 @@ EOF
do
$ECHO "$obj" >> $output
done
- delfiles="$delfiles $output"
+ func_append delfiles " $output"
output=$firstobj\"$file_list_spec$output\"
else
if test -n "$save_libobjs"; then
@@ -6933,7 +6936,7 @@ EOF
if test -n "$last_robj"; then
eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
fi
- delfiles="$delfiles $output"
+ func_append delfiles " $output"
else
output=
@@ -7000,7 +7003,7 @@ EOF
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([
\,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols
$output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols
$output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter <
$orig_export_symbols > $export_symbols
fi
@@ -7041,10 +7044,10 @@ EOF
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
@@ -7156,7 +7159,7 @@ EOF
reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" |
$SED 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
@@ -7239,8 +7242,8 @@ EOF
if test "$tagname" = CXX ; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
;;
esac
fi
@@ -7260,7 +7263,7 @@ EOF
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -7270,17 +7273,17 @@ EOF
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
compile_deplibs="$new_libs"
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -7288,7 +7291,7 @@ EOF
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
fi
@@ -7307,18 +7310,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
@@ -7327,12 +7330,12 @@ EOF
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
+ *) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -7358,18 +7361,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs
"_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
@@ -7442,7 +7445,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7450,7 +7453,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7595,7 +7598,7 @@ EOF
else
oldobjs="$old_deplibs $non_pic_objects"
if test "$preload" = yes && test -f "$symfileobj"; then
- oldobjs="$oldobjs $symfileobj"
+ func_append oldobjs " $symfileobj"
fi
fi
addlibs="$old_convenience"
@@ -7603,10 +7606,10 @@ EOF
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
@@ -7617,10 +7620,10 @@ EOF
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
@@ -7638,7 +7641,7 @@ EOF
else
echo "copying selected object files to avoid basename conflicts..."
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
@@ -7662,9 +7665,9 @@ EOF
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj
$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
;;
- *) oldobjs="$oldobjs $obj" ;;
+ *) func_append oldobjs " $obj" ;;
esac
done
fi
@@ -7770,9 +7773,9 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
- newdependency_libs="$newdependency_libs $libdir/$name"
+ func_append newdependency_libs " $libdir/$name"
;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
+ *) func_append newdependency_libs " $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
@@ -7786,9 +7789,9 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlfiles="$newdlfiles $libdir/$name"
+ func_append newdlfiles " $libdir/$name"
;;
- *) newdlfiles="$newdlfiles $lib" ;;
+ *) func_append newdlfiles " $lib" ;;
esac
done
dlfiles="$newdlfiles"
@@ -7805,7 +7808,7 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlprefiles="$newdlprefiles $libdir/$name"
+ func_append newdlprefiles " $libdir/$name"
;;
esac
done
@@ -7817,7 +7820,7 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlfiles="$newdlfiles $abs"
+ func_append newdlfiles " $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
@@ -7826,7 +7829,7 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlprefiles="$newdlprefiles $abs"
+ func_append newdlprefiles " $abs"
done
dlprefiles="$newdlprefiles"
fi
@@ -7931,9 +7934,9 @@ func_mode_uninstall ()
for arg
do
case $arg in
- -f) RM="$RM $arg"; rmforce=yes ;;
- -*) RM="$RM $arg" ;;
- *) files="$files $arg" ;;
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
esac
done
@@ -7958,7 +7961,7 @@ func_mode_uninstall ()
if test "$opt_mode" = clean; then
case " $rmdirs " in
*" $odir "*) ;;
- *) rmdirs="$rmdirs $odir" ;;
+ *) func_append rmdirs " $odir" ;;
esac
fi
@@ -7984,17 +7987,17 @@ func_mode_uninstall ()
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- rmfiles="$rmfiles $odir/$n"
+ func_append rmfiles " $odir/$n"
done
- test -n "$old_library" && rmfiles="$rmfiles $odir/$old_library"
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
case "$opt_mode" in
clean)
case " $library_names " in
*" $dlname "*) ;;
- *) test -n "$dlname" && rmfiles="$rmfiles $odir/$dlname" ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
- test -n "$libdir" && rmfiles="$rmfiles $odir/$name $odir/${name}i"
+ test -n "$libdir" && func_append rmfiles " $odir/$name
$odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
@@ -8022,13 +8025,13 @@ func_mode_uninstall ()
# Add PIC object to the list of files to remove.
if test -n "$pic_object" &&
test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
+ func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" &&
test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
+ func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
@@ -8044,7 +8047,7 @@ func_mode_uninstall ()
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
- rmfiles="$rmfiles $file"
+ func_append rmfiles " $file"
;;
esac
# Do a test to see if this is a libtool program.
@@ -8053,7 +8056,7 @@ func_mode_uninstall ()
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
- rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
@@ -8061,12 +8064,12 @@ func_mode_uninstall ()
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $odir/$name $odir/${name}S.${objext}"
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $odir/lt-$name"
+ func_append rmfiles " $odir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $odir/lt-${noexename}.c"
+ func_append rmfiles " $odir/lt-${noexename}.c"
fi
fi
fi
diff --git a/libltdl/m4/libtool.m4 b/libltdl/m4/libtool.m4
index dcb2c43..01a9c41 100644
--- a/libltdl/m4/libtool.m4
+++ b/libltdl/m4/libtool.m4
@@ -7324,6 +7324,23 @@ fi
if test x"$lt_shell_append" = xyes; then
_LT_PROG_XSI_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_XSI_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile >
$cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f
"$cfgfile.tmp")
+ test 0 -eq $? || _lt_xsi_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="\1%g' $cfgfile >
$cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f
"$cfgfile.tmp")
+ test 0 -eq $? || _lt_xsi_replace_fail=:
fi
if test x"$lt_shell_substring" = xyes; then
hooks/post-receive
--
GNU Libtool
