Thanks for the input. Then, I suppose there's no way to assign the IP on boot without DHCP, there is?
Can it be done without using <network> type elements? Regards, Francisco. On Fri, Feb 20, 2009 at 19:52, Ulrich Dangel <[email protected]> wrote: > On Friday 20 February 2009 13:54:20 Francisco José Martín wrote: > Hi, > > > We have tried several ways to assign a static ip address to the guest os > > eth0 device on boot, but we didn't success. Is there any easy way to do > it? > > Yes. Create a network definition, specify a host element to the dhcp > definition, attach the machine to the created bridge and it should work. > > <network> > <name>sample</name> > <forward dev='eth0' mode='nat'/> > <bridge name='intbr0' stp='on' forwardDelay='0' /> > <ip address='192.168.122.1' netmask='255.255.255.0'> > <dhcp> > <range start='192.168.122.2' end='192.168.122.254' /> > <host mac='AA:BB:CC:DD:EE:FF' ip='192.168.122.102'/> > </dhcp> > </ip> > </network> > > Snippet for the domain definition: > > <interface type='bridge'> > <mac address='AA:BB:CC:DD:EE:FF'/> > <source bridge='intbr0'/> > <target dev='vnet0'/> > </interface> > > > > When the guest OS is booted, the eth0 device exists, but is not up, and > > doesn't have the IP. > > Is dnsmasq installed and running? Does the guest system use dhcp? > > Uli > > -- > Libvir-list mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/libvir-list >
-- Libvir-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/libvir-list
