Thanks for your help Laine In my case disabling dhcpd is not an option so I took the path of disabling dhcp on virbr0. Pxe is handled by xcat which uses dhcpd for this. It seems to be working fine :)
Regards Em qua, 20 de jun de 2018 10:59, Laine Stump <[email protected]> escreveu: > On 06/18/2018 01:00 PM, Daniel. wrote: > > Thanks for the reply Laine. My problem is that dnsmasq is masking > > dhcpd, xCAT uses dhcpd for PXE stuff. If dnsmasq answer DHCP requests > > the PXE boot won' t work. I want to see the logs for ensuring the > > dnsmasq is not masking dhcpd. > > The dnsmasq run by libvirtd only listens on bridges that libvirt itself > creates for libvirt virtual networks. If the PXE boot you're talking > about is happening on a different interface, then libvirt's dnsmasq will > not be messing with it. > > If, on the other hand, you want to do PXE boot on the virtual networks > created by libvirt, then you can either 1) disable libvirt's dhcp on > that network by removing the <dhcp> section from the network definition > and restarting it, or 2) read in the libvirt virtual network > documentation on how to set it up to support PXE boot via dnsmasq (and > don't configure your dhcpd to listen on that interface). > > > > > Regards, > > > > 2018-06-18 11:39 GMT-03:00 Laine Stump <[email protected]>: > >> On 06/18/2018 09:16 AM, Daniel. wrote: > >>> Cool, thanks!! Does it have logs? > >> > >> Whatever dnsmasq chooses to log, and wherever it chooses to log it. (I > >> actually looked once to see if there was a way of reducing the amount of > >> logging, and didn't find much of anything useful.) > >> > >> If you were planning to learn the current IP address of a particular > >> guest's interface by looking at the logs, you can instead use the virsh > >> domifaddr to to that. > >> > >>> > >>> > >>> Cheers > >>> > >>> Em 18/06/2018 12:55 AM, "Laine Stump" <[email protected] > >>> <mailto:[email protected]>> escreveu: > >>> > >>> On 06/15/2018 06:49 PM, Daniel. wrote: > >>> > Hi everybody, > >>> > > >>> > I'm using libvirt together with xCAT, on the same host, for > testing > >>> > purposes. xCAT install and manages dhcpd. How libvirt interacts > with > >>> > dhcpd? And if doens't how does the dhcp server of libvirt works, > plus > >>> > where I can find information on how to troubleshot it? > >>> > >>> libvirt doesn't use dhcpd. It runs a separate instance of dnsmasq > for > >>> each virtual network that is defined within libvirt. Each instance > >>> listens *only* on the bridge device that was created by libvirt > for that > >>> network. IIfi dhcpd has an option that tells it to listen on all > >>> interfaces (or to automatically start listening on any new > interface > >>> that is created), you should disable that option so that it doesn't > >>> attempt to listen for dhcp requests on the bridges created by > libvirt. > >>> > >>> > >> > > > > > > > >
_______________________________________________ libvirt-users mailing list [email protected] https://www.redhat.com/mailman/listinfo/libvirt-users
