Thank you, James!
The various reg test diffs show how important boxes are to LilyPond... ;)
The slight and barely noticeable unintentional extra space that has been
removed from rounded-corner box skylines causes many tiny shifts (as changed
skylines change spacing).
Just to give **one obvious example** (a fret diagram regtest) of why and how
the unintentional extra padding, small as it may be, had an influence on the
skylines and therefore on object placement: Fret diagrams are made out of lines
(i.e. boxes) with rounded corners and the scaled-up detail PNG shows (marked by
green arrow) how a skyline is dented by a slightly oversized skyline and the
letter "C" is shifted a wee bit up compared to the new rendering (right).
This all results in lots of bluish-green regtest differences that remind me of
Joni Mitchell's "A Case of You":
"... in the blue TV screen light I drew a map of Canada..."
All the best,
Torsten
---
** [issues:#5307] Skyline Refinements (Rounded Boxes and Rotated Ellipses)**
**Status:** Started
**Created:** Sun Apr 15, 2018 09:46 PM UTC by Torsten Hämmerle
**Last Updated:** Sat Apr 21, 2018 11:38 AM UTC
**Owner:** Torsten Hämmerle
**Attachments:**
-
[skylines-boxes-2-19-81.png](https://sourceforge.net/p/testlilyissues/issues/5307/attachment/skylines-boxes-2-19-81.png)
(82.3 kB; image/png)
http://codereview.appspot.com/341140043
Recently, there have been some discussions about mysterious spacing of
\rounded-box markup.
Harm identified skyline problems as the cause and submitted the following bug
report:
[Possible regression with box-markup/rounded-box-markup
](http:///lilypond.1069038.n5.nabble.com/Possible-regression-with-box-markup-rounded-box-markup-tt211212.html)
Before Mike Solomon's new skyline handling, there were no such uninteded extra
margins.
# Rounded Box Skylines
The skyline of boxes with rounded corners do not tightly wrap the boxes but
there's an unintentional margin (as wide as the corner radius).
Apart from that here are a few other shortcomings and so I have decided to
create a more general box-and-rotated-ellipses skyline issue.
#Other issues
When working on this case, I came across a few other things that call for
improvement and so I've included them into the test file. Most notably, there
is a general problem with rotation. And it would be nice to recreate the
rounded corners for large boxes/radii.
At the same time, one should keep run-of-the-mill stuff like ledger lines as
simple and fast as possible.
# Test file
A file with 'debug-skylines switched on and TextScript padding values set to 0
in order to be able to check how the markup objects are fitted together.
I have tried to demonstrate about everything you cold do with boxes (including
scaling, rotating, cominations thereof).
~~~
#(ly:set-option 'debug-skylines #t)
{
\set Staff.instrumentName = \markup #(lilypond-version)
\override Staff.TextScript.padding = 0
\override Staff.TextScript.outside-staff-padding = 0
\override Staff.TextScript.outside-staff-horizontal-padding = 0
\override Staff.TextScript.self-alignment-X = #CENTER
\override Staff.TextScript.layer = 0
f'''4
c'' ^\markup \override #'(thickness . 4) \box \teeny 1
_\markup \with-color #grey \filled-box #'(-1 . 4) #'(1 . 4) #1
b' ^\markup \rounded-box "2!" ^\markup \rounded-box "3"
d'' ^\markup \circle "*" ^\markup \rotate #90 \ellipse "Elli"
_\markup \with-color #grey \rotate #10 \filled-box #'(-2 . 5) #'(1 . 4)
#10
_ \markup \rotate #36 \override #'(corner-radius . 20) \scale #'(1 . 0.4)
\rotate #-68 \scale #'(1.6 . 1) \rounded-box "dop"
f'' _\markup \override #'(corner-radius . 0.5) \rounded-box "."
a' ^\markup \rotate #30 \rounded-box "rotated a"
_\markup \scale #'(1 . 1.5) \rotate #45 \override #'(thickness . 5)
\rounded-box \rotate #-45 \scale #'(2 . 1) \bold "!"
d'' _\markup \override #'(corner-radius . 20) \rounded-box "4"
a'' ^\markup \rotate #-165 \box "rotated b"
_\markup \rotate #180 \override #'(corner-radius . 20) \rounded-box \teeny
\override #'(baseline-skip . 0) \center-column { "Upside" "Down"
}
}
~~~
(see attached PNG file)
* Ledger lines are filled rounded boxes, too (!)
* Corner radius is misinterpreted as line thickness and padded around the box.
* Ledger lines have rounded corners, but the blot diameter is so small that the
effect didn't disturb too much.
* When rotating boxes, the skylines still consist of one single non-rotated
rectangular box.
* Rounded corners are not replicated in the skylines, even if this may be
beneficial for bigger radii.
* Ellipse skylines gradually deteriorate when being rotated. In the example,
the skyline of ellipse "Elli" has completely collapsed because of the 90°
rotation.
* The rhombus "!" has been created by rotating and scaling that unfortunately
caused a collapse of the skyline.
* Rotations in general cause large skyline boxes that hamper object placement a
lot.
---
Sent from sourceforge.net because testlilyissues-a...@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/testlilyissues/issues/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/testlilyissues/admin/issues/options. Or, if this is
a mailing list, you can unsubscribe from the mailing list.------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Testlilyissues-auto mailing list
testlilyissues-a...@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/testlilyissues-auto
