Carl,
I did not notice the rounded ends - now zooming in I see them!
So yes, it is enough to make the barre thickness configurable.
Thanks,
Stefan
--
Stefan E. Mueller
stefan.e.muel...@gmx.de
On Wed, 27 Nov 2024, Carl Sorensen wrote:
Stefan,
See my comment below about the line.
On Sat, Nov 23, 2024 at 5:14 PM Stefan E. Mueller <stefan.e.muel...@gmx.de>
wrote:
Dear Carl,
thanks for your response. I think it would be worthwhile to have
the last
fret plotting and barre width configurable. I am happy to help,
just not
sure how useful I can be (never worked with scheme).
If I remove the dots at first fret on string 1 and 5, I see that
the
barre-line ends right at the string position. I'd prefer if it
would
extend a little to the left and right - if the barre line had
the full
thickness of the dots, and one would leave the dots in, this
would probably
do. Which brings us back to the necessity to configure the barre
line thickness.
The line has rounded ends. The rounding radius is half the line thickness.
In the current implementation the barre line thickness is the dot radius, so
the radius of the line is half the dot radius.
If the thickness of the barre line were the dot diameter, the radius would
be the dot radius, and the line would show up as if it had the dots on the
end.
So you can still ignore the dots and just increase the barre thickness.
HTH,
Carl
