One workaround is to use the following setting,
\override Staff.SustainPedalLineSpanner #'staff-padding = #5
and adjust the number 5 to be large enough that all pedal marks are as
low as the lowest one in the score but not too large so that the pedal
marks end up being too low. The value specifies the minimum distance to
the stave.
/Mats
stefankaegi wrote:
Sorry, that I write again, but it's very urgent. Maybe it wasn't clear
what I meant. There is an example image in the mail. As you see the
pedal isn't always at the same height. How could I fix that?
Thank you for your answers
Best wishes
Stefan
Am Sonntag, den 13.12.2009, 14:06 +0000 schrieb Neil Puttock:
2009/12/12 James Bailey <[email protected]>:
This means this:
\new Staff = "LH" << \LH \pedal >>
This will only work if the skips in \pedal coincide with notes in \LH,
otherwise the brackets will still be misaligned.
Regards,
Neil
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
lilypond-user mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/lilypond-user
--
=============================================
Mats Bengtsson
Signal Processing
School of Electrical Engineering
Royal Institute of Technology (KTH)
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [email protected]
WWW: http://www.s3.kth.se/~mabe
=============================================
_______________________________________________
lilypond-user mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/lilypond-user
