On Fri, Aug 27, 2010 at 8:00 AM, <nvhariha...@gmail.com> wrote: > Hi, > Thanks for allowing me to start my contributions. > I have downloaded 23/08/10 daily packages and put the binaries into MMC and > boot the system. It was hanging in the U-Boot after I2C ready console print. > > My beagle board is Rev C4.
Common problem with upgrading to X-loader 1.4.4ss and u-boot 2010-03+ Your board has an older X-loader installed (factory 1.4.2 probally), with MLO and u-boot.bin on the fat partition you need to hold down the user button to get to u-boot prompt.. Once there reflash the MLO and u-boot.bin.. U-boot Commands: http://elinux.org/BeagleBoardUbuntu#Manual_Run Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
