Hi Matt, After using 'linaro-media-create' from older branch (bzr branch lp:linaro-image-tools -r 169) I was able to create boot images.
Thanks for your help. -Praveen -----Original Message----- From: Matt Waddel [mailto:matt.wad...@canonical.com] Sent: Tuesday, December 07, 2010 10:41 PM To: Praveen Arkeri Cc: linaro-dev@lists.linaro.org Subject: Re: Linaro-Alpha-1:Unable to Create Boot Images Hi Praveen, I can recreate the same failure you are seeing. Something is broken in the linaro-media-create that is being installed with: sudo apt-get install linaro-image-tools ... The first thing I see is the hwpack isn't installing correctly and so probably the rootfs isn't installing either. Using an older branch of linaro-media-create I was able to create a bootable system: bzr branch lp:linaro-image-tools -r 169 Also, the vexpress is usually installed to 2 devices. The boot system to the SD card and rootfs on a USB device. The rootfs on an SD card is really slow. --Matt On 12/07/2010 05:29 AM, Guilherme Salgado wrote: > On Tue, 2010-12-07 at 17:53 +0530, Praveen Arkeri wrote: >> Hi Guilherme, >> >> With headless build image I am still getting same errors as before with >> missing u-boot.bin. >> Detailed command log is here-->http://pastebin.com/ygRQRGe2 > > I don't see anything suspicious there, and I was able to create an image > using the alip tarball. However, I'm using the latest > linaro-media-create from lp:linaro-image-tools. Can you give that a > try? https://wiki.linaro.org/Releases/MilestoneBuilds has the > instructions > >> >> -Praveen >> >> -----Original Message----- >> From: Guilherme Salgado [mailto:salg...@canonical.com] >> Sent: Tuesday, December 07, 2010 5:42 PM >> To: Praveen Arkeri >> Cc: linaro-dev@lists.linaro.org >> Subject: Re: Linaro-Alpha-1:Unable to Create Boot Images >> >> Hi Praveen, >> >> On Tue, 2010-12-07 at 17:18 +0530, Praveen Arkeri wrote: >>> Hi, >>> I am trying to create boot images for vexpress platform following >>> instructions mentioned here >>> https://wiki.linaro.org/Releases/MilestoneBuilds. >>> >>> >>> >>> Daily Build & HwPack Images used: >>> >>> · >>> http://releases.linaro.org/platform/linaro-n/headless/alpha-1/linaro-natty-headless-tar-20101202-1.tar.gz >>> >>> · >>> http://releases.linaro.org/platform/linaro-n/hwpacks/alpha-1/vexpress/20101201/1/images/hwpack/hwpack_linaro-vexpress_20101201-1_armel_supported.tar.gz >>> >> >> I was able to successfully create an image (although I can't boot it as >> I don't have a vexpress board) using the two files above. >> >>> >>> >>> I am getting errors while installing images on SD card when I tried >>> following command: >>> >>> >>> >>> sudo linaro-media-create --rootfs ext3 --mmc /dev/sdb --dev vexpress >>> --binary linaro-natty-alip-tar-20101202-1.tar.gz --hwpack >>> hwpack_linaro-vexpress_20101201-1_armel_supported.tar.gz >> >> Oh, here you're using the alip tarball instead of the headless one that >> you listed above. I'm downloading it now and will try to create an >> image using the same command as you did. >> >>> >>> tar: binary/usr/lib/u-boot/ca9x4_ct_vxp/u-boot.bin: Not found in >>> archive >>> >>> tar: Exiting with failure status due to previous errors >>> >> >> Is there any chance there were other errors higher up? It'd be nice if >> you could pastebin them. >> >>> I am not sure whether I am using right build images, can anyone point >>> me to the working build images for vexpress platform. >> >> The tarballs you used should've worked, I think. >> >> > > > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
